Pots and Saucers — Pots and Growing Media

The conical rubber plug has a diameter of 26/32 mm and works as a stopper (like a cork). It is mainly used in commercial vessel systems (such as Ebb & Flow trays) to prevent leakage until the tray is flushed through the drain hole.

Detailed features

• Type: conical rubber plug, working like cork stoppers.
• Size: 26/32 mm (in the context of Ø 28–32 mm) — corresponds to the stated range.
• Application: Closes trays during flooding; after installation, when the plug is removed, it allows filling with fresh water and flushing soil and residues through the drain hole.

Recommendations for use

• When installed, the plug seals the tray completely, allowing flooding without leakage.
• After removing the plug, the system automatically allows waste to drain. This makes cleaning and preparing the tray again easier.

Benefits

The rubber plug is a practical and inexpensive solution for controlled filling and draining of trays. It is easy to fit and provides a reliable seal during filling; removing it allows efficient rinsing and cleaning without additional mechanisms. This gives maximum control over the irrigation cycle.

Plastic saucer Cassiopea measuring 60×20 cm in anthracite — designed to collect excess water beneath the matching Cassiopea pot.

Detailed features

• Manufacturer / series: Cassiopea - Greentown series — compatible with Cassiopea pots
• Dimensions: 60 cm × 20 cm (width × length) — matches the base of a 60×20 pot
• Colour: anthracite (dark grey)
• Material: UV-resistant plastic (suitable for outdoor use without changing in sunlight) — a feature typical of the same line of pots and accessories.
• Function: collects excess water from the pot (drainage saucer), preventing water from leaking onto the surface where the pot is placed

Recommendations for use

• Ensure the saucer sits flat and level so it collects water from the pot evenly.
• After watering, check that the water is not overflowing — if its capacity is exceeded, pour out the excess.
• When used on windowsills or shelves, protect the surface with a layer (such as a rubber mat) beneath the saucer to prevent scratches.
• If water accumulates for a prolonged period, dry and clean the saucer to prevent salt build-up or bacterial deposits.

Benefits

This Cassiopea 60×20 saucer in anthracite offers the practical function of collecting excess water, in a design that fits and visually complements the pot from the same series. It protects the surface where the pot is placed by catching water and preventing spills.

The perforated Root Plus pot is designed to optimise root growth. Its cylindrical shape, together with the conical ventilation openings, provides better air circulation and prevents root entanglement. 

• up to 30% faster growth compared with conventional pots
• improves absorption of water and nutrients
• promotes more vigorous and healthy growth
• volume: 6.5 L
• height: 21 cm
• diameter: ⌀ 20 cm
• colour: black inside, white outside
• origin: Korea

Healthy roots are the most important part of a plant’s life! The Root Plus pot ‘air-pruning’ structure provides your plants with a healthy root structure.

What exactly is root ‘air pruning’? The walls of Root Plus pots have a conical texture. This makes the roots grow towards the ventilation holes without becoming tangled. When the root tips reach the ends of the holes, they come into contact with the air and dehydrate, which automatically causes more root hairs and new root branches to grow. This process then repeats over and over again until the plants develop the strong root structure needed to absorb water and nutrients for vigorous growth. 

Features:

• no root tangling
• easy moisture control
• sufficient thickness for protecting plants from overheating during intense sunlight
• quick and easy assembly
• side ventilation openings allow excellent air circulation to the roots
• grid base, promoting air circulation and drainage

Advantages:

• excellent air circulation and drainage
• development of abundant root hairs
• made from high-quality materials
• stable and durable
• UV protection
• recyclable

The BetterGrow support holds your orchids in place without the need for support clips.

• for supporting orchids or other houseplants
• attractive design with a leaf at the top end
• length: 50 cm
• colour: transparent

AutoPot 225-litre FlexiTank revolutionises water storage — everything you need in one compact box. It requires no assembly tools, reduces storage and delivery costs, and takes only a few minutes to assemble. It simply could not be easier. Unlike other tanks and barrels, the AutoPot FlexiTank container can be stored away when not in use and fits where other tanks cannot.

Feature:

• Box dimensions: 78.5x18x12.5cm
• Box weight: 2.7kg
• When filled with water: 63.5cm diameter x 81cm high
• Capacity: 225 litres

BetterGrow clips are ideal for supporting orchid stems or for decoration.

• suitable for supporting orchids
• for tying climbing / trailing plants
• for decoration
• quantity per pack: 12 pcs.
• colour: transparent

BOYU Heater HT-8100 is a heater with a thermostat for nutrient containers from 190 to 250L, helping you maintain the desired nutrient-solution temperature.

• power: 200W
• suitable for containers: 190-250L
• voltage: AC230 / 115V
• frequency: 50/60Hz

BOYU Heater HT-8300 is a heater with a thermostat for nutrient containers from 300 to 350L., helping you maintain the desired nutrient-solution temperature.

• power: 300W
• suitable for containers: 300-350L.
• voltage: AC230 / 115V
• frequency: 50/60Hz

A durable and practical metal table measuring 200×100 cm — suitable for trays, a workshop, garden, greenhouse or a versatile work area.

• Dimensions: 200 cm long × 100 cm wide.
• Construction: metal — a sturdy frame and legs, suitable for loads and varied conditions (indoors, outdoors and workshops).
• Type: modular/folding (or easy to assemble) — allowing convenient transport and storage. This is a typical advantage of folding metal tables.
• Application: versatile — for trays/processing, work, storage, the garden, greenhouse, home workshop or a temporary workspace.

• Use the table as a work surface for transplanting, preparing soil, watering and sorting crops — especially convenient for greenhouse work.
• For heavy-duty work or loads — make sure the frame is strong and stable; metal construction generally offers high resistance compared with wooden or plastic alternatives.

AutoPot 400-litre FlexiTank revolutionises water storage — everything you need packed into one compact box. It requires no tools for assembly, reduces storage and delivery costs, and takes only a few minutes to put together. It truly could not be easier. Unlike other tanks and barrels, the AutoPot FlexiTank container can be stored on its side when not in use and fits where other tanks cannot.

Feature:

• box dimensions: 112x18.5x12.5 cm
• box weight: 4.8 kg
• when filled with water: 68 cm diameter x 111 cm high
• capacity: 400 litres

Plant support net 1.53m / 50m. The price is for a 50-metre roll.

• width: 1.53 m
• length: 50 m
• mesh size: 16 x 16cm

Super ERCOLE P&B 6.5L is a square pot with air holes.

• Reduces the growth time of young plants, as the roots receive a better supply of oxygen.
• Prevents overwatering and circular root growth.
• Promotes faster growth.
• Suitable for soil, coco and hydroponics.
• The holes are located at the bottom and sides of the pot.
• Dimensions: 20x20x25.5 cm.

Bradas PLANT NET is a durable UV-resistant net for supporting climbing and trailing plants. Its 2 × 10 m size makes it an excellent choice for home gardens, small greenhouses and vegetable beds. It provides reliable plant support, improves access to light and air, and makes care and harvesting easier.

Bradas PLANT NET is a practical solution for the proper development of all climbing crops. Its use lets plants grow vertically, improving air circulation, reducing the risk of fungal diseases and ensuring better light exposure for foliage and fruit.

Made from UV-stabilised polyethylene (PE) with a weight of 8 g/m², it is both lightweight and sufficiently durable for the entire season. Its 15 × 17 cm rectangular openings make it easy to guide and tie plants, while also allowing convenient access for pruning, watering and harvesting.

The net can be installed both vertically and horizontally, depending on the crop and support structure used. It is easy to shape, cut and secure to wooden or metal stakes, wire structures and greenhouse frames.

Technical specifications

✔️ Manufacturer: Bradas

✔️ Series: PLANT NET

✔️ Type: Support net for climbing plants

✔️ Size: 2 × 10 m

✔️ Area: 20 m²

✔️ Mesh size: 15 × 17cm

✔️ Weight: 8 g/m²

✔️ Material: UV-resistant polyethylene (PE)

✔️ Colour: Green

✔️ Suitable for vertical and horizontal installation

✔️ Easy to shape and cut

🔧 Use

Suitable for:

• Cucumbers

• Tomatoes

• Beans

• Peas

• Hops

• Ornamental climbing plants

• Greenhouses

• Raised beds

• Home and professional gardens.

📋 Instructions for use

1. Stretch the net between sturdy stakes, metal profiles or the greenhouse structure.
2. Secure it with cable ties, rope or suitable clips.
3. Guide young plants towards the net at the start of growth.
4. If necessary, provide additional tying support.
5. At the end of the season, clean the net and store it in a dry place for reuse.

💡 Urban Botaniks tip: Vertical growing with PLANT NET not only saves space, but also improves crop quality. Better air circulation and less contact between fruit and the ground reduce the risk of rot and make daily plant care easier.

Elegant, modern rectangular planter with a 35 L capacity in anthracite, suitable for outdoor and indoor planting. Detailed

features Volume:

• 45 liters External
• length: 70 cm  External
• height: 30 cm     External
• width: 30 cm   Inner
• dimensions: about 63.5 × 24 × 30 cm (length × width × height) Series: Sagitta – decorative planter
• line made by rotational moulding (rotational line) Style: smooth, clean form,
• contemporary design Material: powdered polyethylene (thermoplastic
• resin / powdered polyethylene) Resistance: resistant to weather, UV
• rays and impacts Production method: rotational moulding (rotational moulding / rotamoulding) Colour
• range: Anthracite (other colours such as bronze, terracotta,
• etc. are also available) Recommendations for use When planting, provide a drainage

layer—gravel, expanded clay

• or perlite—for optimal water drainage. Place the planter on a stable, level
• base, especially when positioned outdoors. During repeated strong temperature swings (hot /
• cold), use mulch or light shade to protect the roots. If it needs to be moved,
• do so partially (when the planter is not completely full) to reduce the load. In winter,
• in areas with frost, it can be moved to a sheltered place or insulated to prevent cracking.   Benefits The rectangular pot

SAGITTA

70 x 35 x 35 cm, 45 l, Anthracite combines clean aesthetics with practical functionality. It is resistant to atmospheric influences and UV rays, made by rotational molding, which guarantees strength and stability. Its shape is suitable for various compositions and completion with compatible products from the series (Lira, Gemini).

This plant support net is exceptionally strong and able to withstand a heavy load. It has a double strand along the top and bottom edges, which contributes to its strength.

The openings are 150x150 mm, slightly smaller, solely to provide greater strength and better plant support. It is rolled in rolls with a width of 1.36 m and length of 100 m.

Colour – White.

HS Valve is a single-channel valve that uses the same channel for both filling and tray drainage. It is supplied as standard with a 3.5 mm internal opening, but the diameter can be modified on request. The valve offers 6 – 31 l/min filling, depending on the diameter and pressure, and 1.7 – 6 l/min drainage. Suitable for installation below filters, it is resistant to contamination and aggressive environments.

Detailed features

• Operating function: single-channel – one line serves both filling and drainage.
• Opening diameter: standard 3.5 mm, other sizes on request.
• Filling flow rate: from 2.3 to 31 l/min, depending on the opening diameter and water pressure.
• Drainage flow rate: from 1.7 to 6.0 l/min, depending on the opening diameter.
• Hose-connection options:
  • ¾″ hose
  • ½″ hose
  • PE hose 8×10.5 mm and 10×12.5 mm
  • PE hose 6×8 mm ([turn0view0])
• Manual bottom valve: allows filling to a specific tray to be stopped.
• Installation option: installed below the filters to prevent clogging from leaves and contaminants.
• Construction and maintenance: durable design, resistant to demanding growing conditions, with a removable internal cone for easy cleaning.

Recommendations for use

• Choose a suitable orifice diameter (3,5 mm or another size on request), matched to the water pressure for the desired filling and drainage flow rate.
• Install the valve beneath the tray filter to ensure protection from contaminants and trouble-free operation.
• Use the manual bottom valve when you want to stop filling a particular tray.
• Cleaning is easy — simply disassemble the removable cone and remove the accumulated particles.

Benefits

• Unified filling and drainage line — fewer components and easier installation.
• Wide flow range — from 2,3 to 31 l/min for filling and from 1,7 to 6,0 l/min for drainage, depending on the conditions.
• Flexible connection options for various hoses (½", ¾", PE).
• Easy installation below filters and excellent resistance to contamination.
• Robust construction and easy servicing ensure a long service life.

AutoPot 1000 L FlexiTank reservoir revolutionises water storage — everything you need packed into one compact box. It requires no assembly tools, reduces storage and delivery costs, and takes only a few minutes to assemble. It could hardly be easier. Unlike other reservoirs and barrels, the AutoPot FlexiTank container can be stored aside when not in use and fits where other reservoirs cannot.

Hydroponic baskets (mesh pots). Suitable for hydroponic and aeroponic systems. Small sizes are suitable for rooting systems.

Elegant decorative Lira-series planter with a 48 L capacity, manufactured by rotational moulding — suitable for outdoor and indoor decoration.

Detailed features

• Capacity: 48 litres
• Outer diameter: around 50 cm
• Inner diameter: around 45 cm
• Height: 38 cm.
• Material: regenerated polyethylene (post-consumer recycled polyethylene)
• Colour: Terracotta
• Series: Lira – decorative planters made by rotational moulding (rotational moulding)
• Design: smooth, with clean lines and contemporary style
• Material: thermoplastic resin – powdered polyethylene. Durability: resistant to impacts, thermal shock and UV rays.
• Suitable uses: indoor and outdoor landscaping, as part of urban design, green spaces and garden decoration
• In larger sizes, the planter has a reinforced base.

Recommendations for use

• When planting, use a drainage layer (gravel, expanded clay) to ensure optimal water management.
• Place the planter on a stable base, especially when it is full or in windy conditions.
• In very high temperatures, dark mulch or shade can be used to reduce root heating.
• When moving it, preferably empty the planter partially first to minimise the effort.
• If used outdoors during winter in frost-prone areas, it can be insulated or moved to a sheltered location.

Plant support net 1.20 m / 1000 m. The price is for a 1000-metre roll.

• width: 1.20m
• length: 1000 m
• mesh size: 16 x 16cm

Bradas PLANT NET is a durable, UV-resistant support net for twining and climbing plants. Its 2 × 20 m size makes it an excellent choice for home gardens, small greenhouses and vegetable beds. It provides reliable plant support, improves access to light and air, and makes plant care and harvesting easier.

Bradas PLANT NET is a practical solution for the proper development of all climbing crops. Its use lets plants grow vertically, improving air circulation, reducing the risk of fungal diseases and ensuring better light exposure for foliage and fruit.

Made from UV-stabilised polyethylene (PE) with a weight of 8 g/m², it is both lightweight and sufficiently durable for the entire season. Its 15 × 17 cm rectangular openings make it easy to guide and tie plants, while also allowing convenient access for pruning, watering and harvesting.

The net can be installed both vertically and horizontally, depending on the crop and support structure used. It is easy to shape, cut and secure to wooden or metal stakes, wire structures and greenhouse frames.

Technical specifications

✔️ Manufacturer: Bradas

✔️ Series: PLANT NET

✔️ Type: Support net for climbing plants

✔️ Size: 2 × 20 m

✔️ Area: 40 m²

✔️ Mesh size: 15 × 17cm

✔️ Weight: 8 g/m²

✔️ Material: UV-resistant polyethylene (PE)

✔️ Colour: Green

✔️ Suitable for vertical and horizontal installation

✔️ Easy to shape and cut

🔧 Use

Suitable for:

• Cucumbers

• Tomatoes

• Beans

• Peas

• Hops

• Ornamental climbing plants

• Greenhouses

• Raised beds

• Home and professional gardens.

📋 Instructions for use

1. Stretch the net between sturdy stakes, metal profiles or the greenhouse structure.
2. Secure it with cable ties, rope or suitable clips.
3. Guide young plants towards the net at the start of growth.
4. If necessary, provide additional tying support.
5. At the end of the season, clean the net and store it in a dry place for reuse.

💡 Urban Botaniks tip: Vertical growing with PLANT NET not only saves space, but also improves crop quality. Better air circulation and less contact between fruit and the ground reduce the risk of rot and make daily plant care easier.

BetterGrow butterfly-shaped clips are ideal for supporting orchid stems or for decoration.

• suitable for supporting orchids
• for tying climbing / trailing plants
• for decoration
• quantity per pack: 10 pcs.
• shape: butterflies

Lightweight and practical agrotextile made from non-woven polypropylene, designed to limit weed growth and maintain optimal conditions for plants. The material allows water and air through, retains moisture in the soil, and is suitable for gardens, greenhouses and ornamental plantings.

Non-woven weed-control agrotextile is a practical solution for soil protection and reducing the need for regular weeding. Its special structure limits light access to the soil surface and prevents unwanted vegetation from germinating.

Made from bonded polypropylene fibres (PP) with a density of 50 g/m², the agrotextile is lightweight and flexible enough to shape easily around plants, beds and decorative areas. At the same time, it allows water and air to pass freely into the soil, supporting root system development and maintaining a favourable microclimate.

The black colour contributes to better weed control, while UV protection ensures durability during prolonged outdoor use. The cover is suitable for vegetable and fruit plantings as well as ornamental gardens and landscaped areas.

 Features

✔️ Type: Non-woven weed-control agrotextile

✔️ Material: Polypropylene (PP)

✔️ Density: 50 g/m²

✔️ Colour: Black

✔️ Size: 1.1 m × 100 m

✔️ UV resistance for outdoor use

✔️ Allows water and air through

✔️ Flexible, easy-to-handle structure

✔️ Maintains soil moisture and temperature

✔️ Suitable for gardening and agriculture

Benefits

✔️ Reduces weed growth without chemicals

✔️ Keeps the soil moist for longer

✔️ Improves growing conditions for plants

✔️ Reduces the need for frequent weeding

✔️ Easy to install and shape around plants

✔️ Suitable for long-term outdoor use

✔️ Economical solution for maintaining clean plantings

 Application

Suitable for use in:

• Vegetable gardens

• Orchards

• Greenhouses

• Flower beds

• Ornamental gardens

• Landscaped areas

• Laying beneath decorative gravel, stones or mulch

• Areas around trees and shrubs

💡 Urban Botaniks tip: For better fixation and a longer cover lifespan, use special fixing pins. When covered with decorative mulch or gravel, the material remains protected and retains its properties for longer.

BetterGrow seahorse-shaped clips are ideal for supporting orchid stems or for decoration.

• suitable for supporting orchids
• for tying climbing / trailing plants
• for decoration
• quantity per pack: 10 pcs.
• shape: seahorse

Super ERCOLE P&B 9 L is a square pot with air holes.

• Reduces the growth time of young plants, as the roots receive a better supply of oxygen.
• Prevents overwatering and circular root growth.
• Promotes faster growth.
• Suitable for soil, coco and hydroponics.
• The holes are located at the bottom and sides of the pot.
• Dimensions: 23x23x28 cm.

An elegant decorative 84 L Lira-series planter, made by rotational moulding – suitable for outdoor and indoor decoration.

Detailed features

• Capacity: 84 litres
• External diameter: approximately 60 cm
• Internal diameter: approximately 54 cm
• Height: 45 cm
• Material: regenerated polyethylene (post-consumer recycled polyethylene)
• Colour: Terracotta
• Series: Lira – decorative planters made by rotational moulding (rotational moulding)
• Design: smooth, with clean lines and contemporary style
• Material: thermoplastic resin – powdered polyethylene. Durability: resistant to impacts, thermal shock and UV rays.
• Suitable uses: indoor and outdoor landscaping, as part of urban design, green spaces and garden decoration
• In larger sizes, the planter has a reinforced base.

Recommendations for use

• When planting, use a drainage layer (gravel, expanded clay) to ensure optimal water management.
• Place the planter on a stable base, especially when it is full or in windy conditions.
• In very high temperatures, dark mulch or shade can be used to reduce root heating.
• When moving it, preferably empty the planter partially first to minimise the effort.
• If used outdoors during winter in frost-prone areas, it can be insulated or moved to a sheltered location.