Promotions

Forget about a distribution board, timer box and relays! Dimlux lighting fixtures can be plugged directly into the socket! Simply set the on and off times and your lighting is ready to operate!
 
Dimlux Maxi Controller is a modular control system for Dimlux lighting, fans and heating. It can control up to 160 Dimlux lighting fixtures or ballasts. You can set the desired brightness using the + and - buttons. The Maxi Controller controls and monitors CO₂, plant temperature and vapour pressure deficit (VPD) depending on the selected connected sensors. Why choose the Dimlux Maxi Controller?

1. Gradual to continuously variable dimming.
2. Create optimal growing conditions for your crop.
3. Advanced connectivity and control options.
4. Simulates sunrise and sunset.
5. Datalog function (continuous recording of measured data)

Features:

 

• the controller works with a 5m standard Interlink cable (included)
• can control up to 160 Dimlux lighting fixtures or ballasts in groups of 40
• the first group of 40 can be controlled with all sensors
• switches lighting manually or automatically
• simulates sunrise and sunset
• measures ambient temperature via a temperature sensor
• measures relative humidity via a RH sensor
• measures plant temperature via a plant temperature camera
• displays the vapour pressure deficit (VPD)
• controls CO₂ via a CO₂ sensor
• detects flammable, toxic and harmful gases via a Gas Protect CO₂
sensor
• displays min./max. values for all sensors with a time stamp
• Datalog function for recording measured data from all sensors
• controls the fan based on temperature and humidity (with FAN/AUX BOX)
• controls a humidifier or dehumidifier and heating (with AUX BOX or FAN/AUX BOX)

 

Instructions for use in English: here* and here*

1. OPTIMAL CONTROL, MAXIMUM EFFICIENCY. Maxi Controller is a modular system* for controlling Dimlux lighting, fans and heating. It also controls and monitors CO2, vapour pressure deficit (VPD) and installation temperature, depending on the selected sensors. Maxi Controller can control up to 160 Dimlux Expert luminaires or Xtreme ballasts. It can silently switch the lighting on or off using the built-in timer. The lighting can also be variably dimmed to reach the desired output. The controller can adjust output according to the room temperature. The Dimlux lighting system dims automatically once a set temperature is exceeded. If the temperature is still too high, Maxi Controller will switch off all or half of the luminaires until the desired temperature is reached. Dimlux Expert luminaires or Xtreme ballasts can be connected directly to a power outlet. Simply set the on/off times and the system is ready to operate. The desired light intensity can be set with the + and – buttons. The Maxi Controller can also operate with asynchronous timing, for example 10 hours on and 10 hours off. This setting reduces total cycles by almost 20%. Sunrise and sunset can also be simulated. Maxi Controller also has a thermostat/hygrostat function. It is also possible to regulate the CO₂ level in an enclosed room using an extremely accurate dual-beam CO₂ sensor. This CO₂ sensor can control CO₂ generators and cold CO₂ systems. *The controller can be expanded to include an AUX BOX, FAN/AUX BOX, CO₂ sensor, CO₂ Gas Protect sensor, plant-temperature camera, humidity sensor and temperature sensor (sold separately).
2. COMPREHENSIVE AND PRECISE SETTINGS. In addition to the extensive 7 dimming levels, the Dimlux Maxi Controller can adjust light output according to room temperature. It also facilitates the transition from gradual dimming to continuously variable dimming, making it even easier to achieve the perfect lighting setting. This is possible by pressing the + and – buttons (brightness), or by setting the desired temperature and leaving the rest to the Dimlux Maxi Controller. When the preset temperature is exceeded, the lights automatically dim or are even partially switched off.
3. SENSORS: MEASUREMENT = KNOWLEDGE. Several sensors are available that can be connected to the Dimlux Maxi Controller. Temperature sensor and humidity sensor can be combined with a plant-temperature sensor for optimal plant growth. The values obtained from the sensors are then analysed and combined to achieve the optimal relationship between temperature, humidity and plant temperature — and therefore vapour pressure deficit.
4. SUNRISE AND SUNSET SIMULATION. Plants do not use photosynthesis until a certain temperature is reached. When lighting switches on after a dark period, this can be stressful and may affect growth; condensation may also form and cause rot. The Dimlux Maxi Controller can prevent this by slowly switching the Dimlux Expert lighting systems on and off, thereby simulating sunrise and sunset.
5. DATALOG FUNCTION. The data-logging function makes it possible to store all measured values from the controller on a USB flash drive for later viewing in graphical form on your computer. The controller records all values to the flash drive every minute.

Defender reflector is an efficient industrial model. The reflector surface has a heat-resistant "titanium white" powder coating that produces a highly diffuse, even light spread. It maintains a reflectivity of 92%. The base metal is H18 aluminium alloy (3% magnesium), which is strong yet flexible, giving the reflector consistently perfect parabolic curves even under the toughest handling – perfect for growers with an ever-changing growing environment.

 

• Coverage area: 2.36m²
• Overall dimensions at the widest setting 70cm x 55cm
• Perfect for one 400W / 600W high-pressure sodium / metal-halide lamp

 

Feature:

 

• Double-parabolic reflector
• Twice the power and efficiency of most other reflectors
• Corrosion-resistant
• 92% light reflectivity
• Robust reflector with a perfect shape

• Balanced full-spectrum light
• ​very high efficacy: up to 2.9µmol/J
• PPF: 2925 µmol/s
• Power consumption: 1025W (± 5%)
• Coverage area: 2.0 x 1.5m
• Lifespan: + 60 000 hours
• Light distribution: 120°
• Light source: Higher Spec Osram and Lumiled LEDs
• Fully adjustable: OFF, 25%, 50%, 75%, 100%  with 0-10V dimmer (included)
• Waterproof: IP65
• Input voltage: 200-240V, 50-60Hz
• Dimensions: 1700 x 1099.6 x 48.2 mm
• Weight: 17.5 kg
• Warranty: 5 years

GrowMax SUPER GROW  800 L/h is a high-capacity two-stage water filtration system, ideal for use in large gardens, nurseries and larger growing operations.

• Eliminates 99% of chlorine and 90% of sediment down to 5 microns, instantly!
• Faster-growing and healthier plants, flowers and vegetables.
• Strengthens plant roots.
• Great for organic production!
• Protects beneficial microorganisms in your soil.
• Get 100% efficiency from your nutrients and fertilizers.

Full product information here!

This system is designed as a standalone filter for the immediate removal of chlorine and sediment from water. It is rated to remove up to 99% of chlorine and can clean up to 90% of sediment above 5 microns. Having chlorine- and sediment-free water is essential for growing healthy plants and maintaining beneficial microorganisms, bacteria and fungi in the root zone and growing media. These microbes cannot survive in the presence of chlorine. Chlorine-free water is also essential for organic fruit and vegetables, hydroponics and every method of organic gardening in general. This filter is not designed to reduce the parts per million (PPM) of your water. Most of these PPM particles are minerals, which can only be removed by reverse osmosis systems.

REMOVES: chlorine, sediment, dirt, rust, oxidising herbicides and pesticides, volatile organic contaminants (chemical contaminants, benzenes, toluene, oils, trihalomethanes, detergents, polychlorinated biphenyls)

When to replace the filters:

• Sediment filter - approximately every 8000 litres of treated water or when clogged
• carbon filter – approximately every 25000 litres of treated water or according to its use (see the example below*)

*Example use:

• 1 hour per week (3200 L/month) - replace the filter 1 time every 8 months
• 1 hour per day, 4 days per week (12800 L/month) - replace the filter 1 time every 2 months
• 1 hour per day, every day (24000 L/month) - replace the filter every month
• 30 minutes per day, every day (12000 L/month) - replace the filter 1 time every 2 months

*Replacement time is relative, as it depends on the hardness of the water you use.

Warranty:

• The product has a 1-year warranty.
• When you register your product here, you will automatically receive one more year of warranty for your product, for a total of 2 YEARS PRODUCT WARRANTY.

HOMEbox Ambient R240 is an excellent choice for the dedicated hobbyist or professional grower with a little extra space for their hobby. This Ambient-series model offers two lighting options: 2 x 465W LED*or 2 x 600W HPS lamps. If you choose the second option, we recommend air-cooled reflectors, whose easy independent ventilation is ensured by two 250mm openings positioned parallel and high in the top of the tent.

• assembled dimensions W/L/H: 240 x 120 x 200cm
• growing area: 2.88m²
• recommended lighting: 2 x 465W LED*
• inlet and outlet duct openings: 4x 100mm, 2x 200mm, 2x 250mm, 2x 300mm
• OmniFlow-Airvent ventilation openings: OmniFlow-Airvent: 4x ⌀ 250mm
• 700µ MicroMesh insect-proof mesh
• metal frame: ⌀22mm
• max. load capacity: 150kg
• the highly reflective PAR+ lining
• Total-Blackout zips that do not let any light through
• removable, waterproof floor liner

10 reasons to choose HOMEbox®:

1. The original: HOMEbox® is the ORIGINAL grow tent and has always been a market leader with its innovative features!
2. Completely lightproof: Total-Blackout zips not only provide extra strength, but close completely, letting no light through, without the need for additional covers and Velcro fasteners. Strong canvas material with an inner layer of thick, flexible polyethylene.
3. More airflow control: The unique, patented OmniFlow ventilation ports allow growers to actively direct incoming fresh air precisely where it is needed, for maximum benefit to the crop.
4. The "intelligent" PAR+ material: HOMEbox® are the only grow tents with super-reflective PAR+ lining, which reflects more plant-usable energy (PAR light) and less heat onto your plants.
5. Higher yields: PAR+ reflects more plant-usable energy and generates less heat, helping produce larger yields and higher-quality crops.
6. Designed in Germany: high-tech German design and engineering in every respect.
7. Better protection: More inlet / outlet ports for ducts / fans and MicroMesh insect screens on the ventilation openings, offering significantly improved pest protection.
8. Strength where you need it: Stronger metal frame, hooks and connectors with precision plastic corners.
9. Easy to assemble: HOMEbox® tents are easy to assemble.
10. Warranty: HOMEbox® tents come with a 2-year warranty.

• The professional choice in lighting fixtures.
• The set includes a Gavita Pro 1000W 400V DE EL lamp with an output of 2100 μmol s-1.
• Illuminates more than 2 sq.m with 2000 μmol s-1.
• The most efficient, highest-output model on the market (Energy efficiency class: A++)
• Compatible with the Gavita Master controller.
• Easy installation — plug in and use.

Gavita Pro 1000e DE

The best lighting is now even better

The new Gavita Pro e-series are improved models of Gavita's existing classic lighting fixture series, now compatible with and adapted for complete lighting control via a Gavita Master controller. You can now control the light with just a few simple button presses.

Gavita Pro HPS fixtures are the professional standard for efficient lighting. Operating at standard 240V, they power high-voltage (400V) electronic horticultural lamps, which outperform ordinary ones in spectrum, light output and lamp efficiency during extended use.

• Fully encapsulated wiring with a GORE-TEX ventilation outlet, no moving parts, completely silent and with almost imperceptible heat output.
• Compatible with high-frequency electronic (400V) horticultural lamps, which have 10-25% greater light output.
• Highly efficient — retain more than 95% of their light-reflecting properties, so you only need to replace the bulb once a year.
• Replaceable Gavita HR96 reflector with 96% reflectivity for maximum efficiency.
• Controlled output: With one knob, increase or decrease the amount of supplied light according to the conditions or development stages of your plants.
• A "soft" light-dimming system allows gradual reduction of emitted light, eliminating stress on the lamp when its supplied current changes.
• Equipped with high-frequency (>100kHz) Gavita electronics.
• No problems caused by electromagnetic interference.

Specifications here!

Dimlux Aux Box connects to the Dimlux Maxi Controller via the controller’s aux port, turning it into a fully automatic climate system. Dimlux Aux Box has two connections – one for a heater or heating unit and one for a humidifier or dehumidifier. Control is electronic and there is no annoying humming.

 

 

Plant temperature is more important than ambient temperature! When the camera is connected, the climate can be controlled based on plant temperature. If the plant temperature becomes too high, the Dimlux Maxi Controller will dim the lights to keep the stomata open. In the event of water shortage (e.g. due to a faulty pump), the lights are also dimmed or switched off to prevent crop damage.

 

• infrared camera for heat detection
• highly precise environmental control
• allows the Dimlux Maxi Controller to calculate VPD*
• used by the professional horticulture industry
• very easy to install – plugs directly into the Dimlux Maxi Controller
• 10m cable

 

*Note: see the detailed description for an explanation of vapour pressure deficit (VPD).

See how to calculate your plant's VPD: here*

 

Dimlux Plant Temperature Camera is a fantastic accessory that accurately measures your plant's infrared levels and sends the information back to the Dimlux Maxi Controller. This information is then used together with room temperature and humidity readings to calculate and display the vapour pressure deficit (VPD)* – the potential of the surrounding air to draw moisture from the plant. It gives the grower the most accurate information on how much the plants need to transpire (release moisture through their leaves) to reach equilibrium with the surrounding atmosphere. A high vapour pressure deficit means your plants will lose more water through their stomata. Low vapour pressure deficits mean plants retain water more easily (great for cuttings, etc.). The Dimlux Maxi Controller can regulate your lighting power according to the temperature difference between the plants and the surrounding atmosphere, ensuring that VPD levels are always within the correct range.

 

VPD (VAPOUR PRESSURE DEFICIT) VAPOUR PRESSURE DEFICIT. The plant temperature camera, connected to and integrated with the Dimlux Maxi Controller, measures the plant temperature and displays the results on the Dimlux Maxi Controller.

The question is: Why do we need a plant temperature camera at all?
The reason is that it is crucial for the Dimlux Maxi Controller to understand the plant's overall condition or health. The temperature of a healthy plant should always be lower than the ambient temperature in which it lives. Water and nutrients continuously move through the plant, keeping it cooler than its surroundings. If the plant temperature rises to the same temperature as the ambient air, it is no longer healthy and will begin to wilt and eventually die. Factors that contribute to this undesirable condition or environment include:

1. High-intensity discharge lighting - HPS (sodium) or MH (metal-halide) lamps
2. Lack of adequate extraction or ventilation
3. Incorrect water supply to the plant.

• With the help and intelligence of the Dimlux Maxi Controller, the lights it controls are dimmed until the plant temperature falls below the ambient temperature and remain that way until the fault causing the temperature imbalance between the plant and the ambient air is resolved (for example, a plumbing or electrical fault).
• Now, with the plant temperature camera, the temperature sensor and the Dimlux humidity sensor, connected to and integrated with the Dimlux Maxi Controller, the controller is programmed to analyse the ambient temperature, plant temperature and humidity levels, and to calculate another vitally important measurement, described as “Vapour Pressure Deficit” or VPD. This measurement is an indicator that best describes the level of environmental support in which the plant lives.
• This environment is critical for optimal growth and nutrient uptake, and depends on how hot and humid it is. If the indoor environment is lit with HPS, MH or CDM lighting, and humidity is above 70 to 80% while temperatures are above 35°C, then the plants' ability to photosynthesise and to take up CO₂ and to absorb nutrients decreases; consequently, the plants' ability to grow and produce flowers and fruit also decreases.
• Therefore, if the environment cannot be controlled or restored to normal conditions, your plants' ability to absorb nutrients and grow optimally will also be reduced. Consequently, reducing the light output and heat from HPS, MH or CDM lighting is the next logical step in balancing the parameters [heat and humidity] to maintain high photosynthetic activity and, more importantly, to keep the stomata in the leaves open.
• By keeping the stomata open for gas exchange, which is the main force driving water and nutrients through the plant, more sugars and amino acids are formed in the flowers/fruits for optimal production. This level of control is possible only with the Dimlux Maxi Controller and your Dimlux lighting. For greater flexibility in your indoor environment in relation to your lighting, the right control equipment is the key to consistently maximising the quality and yield potential of your plants and every harvest!
• The idea of VPD and its application is new, exciting and perhaps confusing to some. The idea, once again, is that if it is too hot or too humid for your plants to function optimally, why waste electricity on lights at full power when the plants cannot use the light, when we can balance heat and humidity by reducing lighting power and bringing the VPD reading to around 1 to 1.2?
• By doing this, the plants will use the nutrients you feed them, and therefore grow and produce optimally. Again, this is possible only with Dimlux lighting, Dimlux Maxi Controller and the plant temperature camera, the temperature sensor and the Dimlux humidity sensor. The same yields have been achieved even at 70% light output, simply because the other parameters were balanced and optimal VPD was achieved.

LUMii AeroTube 200mm. is the latest air-cooled reflector. When used with ducting and a fan, this innovative product allows air to flow through the reflector, helping control the ambient temperature.

 

• Controls temperature
• Tempered glass
• Removable lamp holder for easy access and lamp cleaning
• External double-sided reflector for superior light output and distribution
• Includes a 4m IEC cable
• Recommended wattage: up to 1000W
• ∅ 200mm.

TechGrow - Clima Eco 5A (Minimum speed) controls the minimum speed of your fan until the desired temperature is reached or maintained in the grow room. This budget-friendly controller is easy to operate – it has just two rotary knobs – for setting the minimum fan speed and the desired room temperature.

 

• Controls the minimum fan speed until the desired temperature is reached or maintained
• Minimum fan speed setting range: 10% - 100%
• Temperature setting range: 15° - 35°C
• Hysteresis: 2°C
• Minimum required sensor: TempProbe (not included)

Features:

 

• Controls the minimum fan speed until the desired temperature is reached or maintained
• LED indicator for stable climate or high temperature
• The set minimum fan speed and temperature are retained in the event of a power failure
• Minimum fan speed setting range: 10% - 100%
• Temperature setting range: 15° - 35°C
• Hysteresis (not adjustable): 2°C
• Automatic detection of cable faults or poor sensor connection
• 2 UTP ports
• Easy fuse replacement (spare fuse included)
• Minimum required sensor: TempProbe (not included)

 

Technical specifications:

 

• Power supply: 100-240V
• Power consumption: 3W
• Fuse: 5A
• Power cable: 3x1.5 mm / 1.7 m
• Product dimensions LxHxW: 13x8x7cm.
• Product weight: 934g
• Box dimensions LxHxW: 25x15x14cm.
• Box weight: 1180g

 

Manual available in 5 languages: here

The Ferro flexible hose for CO2 systems, 1m long, is a quality, durable product designed to ensure safe and efficient CO2 delivery to your plants.

This hose is made from an exceptionally strong and resilient material that resists corrosion and does not stretch or shrink under high pressure or temperature changes. This characteristic ensures stable, reliable operation of your CO2 system.

At 1 metre long, this hose offers sufficient flexibility and length for easy connection and adaptation to different systems and configurations. Its ends are compatible with many standard CO2 systems, making it versatile for various applications.

Thanks to its high-quality materials and workmanship, the Ferro flexible hose for CO2 systems is exceptionally durable and reliable. It ensures smooth, efficient CO2 transfer without pressure loss or leaks.

The Ferro flexible hose for CO2 systems - 1m is an indispensable accessory for anyone who wants to improve their CO2 system and provide the best care for their plants.

Dense Bud Compactor 5kg. is a potassium supplement for the flowering stage, formula 0-0-62 (Soluble Potash K₂O 62%), designed to increase flower mass and density. It can be used independently from the standard nutrient programme. ??

Detailed features

• Concentration: Soluble Potash (K₂O) 62%; 
• Role of potassium: Supports sugar production, energy storage and strengthens cell walls to support larger flower sites.
• Purpose: For heavy flowering and fruiting; firms up ‘loose’ flowers where K is deficient.
• Separate use: Formulated to be applied on its own alongside base fertilisers.
• Local source: Potassium for essential plant functions and high yields.

Recommendations and directions for use

• Soil: dissolve 1–2 g/1 L water, 1× per week during the last 3 weeks of flowering; then allow at least 1 week of flushing. Use with water only (do not mix with other fertilisers in the same solution). ✅
• Hydroponics: empty the reservoir, add 1–2 g/1 L, circulate for 48 h, then flush and return fresh nutrient solution; repeat the following week (also allow a week of flushing before harvest).
• Compatibility: used in the final part of flowering as a potassium booster alongside the usual programme (applied separately).

Benefits

Raises potassium during the critical late-flowering stage, supporting sugar and energy accumulation, strengthening stems and producing denser, more compact flowers. Suitable for growers seeking maximum mass and density in the final weeks.

Bluelab PeriPod M3 enables automatic maintenance of ideal pH and nutrient levels in your reservoir!

 

• 1x 120ml/min peristaltic pump for dosing solutions for adjusting pH
• 2x 120ml/min peristaltic pumps for dosing nutrients
• robust housing and wall-mounting capability
• individual pump priming and calibration
• replaceable peristaltic pumps and tubing
• 4 m alkali-resistant tubing for dosing pH adjuster
• 2x 4m tubing for dosing nutrient solution
• compatible with most modern growing systems, including recirculating and standard drain-to-waste systems
• compatible with Bluelab Pro Controller

 

*Please note: Only M-series pumps (M3 and M4) can be connected together. L3 can only be connected to other L3 units

Instructions in English for the use and operation of peristaltic dosing pumps here.

 

Instructions in English for replacing a peristaltic dosing pump here.

 

Instructions in English for replacing dosing tubing here.

 

Instructions in English for replacing a peristaltic dosing pump cartridge here.

 

Stop wasting your valuable time manually dosing and preparing nutrient solution! Bluelab PeriPod M3 is a simple device designed to work with Bluelab Pro Controller and together they provide your optimal solution for dosing nutrients into your reservoir. Bluelab PeriPod M3 responds to signals sent by Bluelab Pro Controller and, through its peristaltic pumps, begins dosing and pumping pH adjuster and nutrient solutions into your reservoir. Measure, control and maintain pH levels precisely.

MotherNature CO2 Bucket 5L – Natural CO2 production thanks to a unique blend of beneficial bacteria. The pump is not included.

Natural CO2 production Designed to last at least 6 months before CO2 production decreases. The unique blend of beneficial bacteria produces a huge amount of CO2. The Mother Nature CO2 bucket, 10 l, is designed to cover a room measuring 2,4 m x 2,4 m, while the 5 l bucket covers a room measuring 1,2 m x 1,2 m. Ideally, the CO2 level rises to 800 PPM. The generators are a natural product and will gradually reduce their CO2 output over time. After use, the contents can be added to your compost heap.

With this air distribution duct, you deliver fresh air and improve the climate in your growing room.

 

• diameter: ⌀ 200mm
• length: 5m

Hager Power Panel 36x600w, 8x continuous 2x heater

Secret Jardin DR300W is a tent from the premium Dark Room series, designed for growing plants indoors with a height of up to 180cm. The tent comes with two DF25 flanges for ducting to an intake and exhaust fan, and all the accessories required to install a complete ventilation system.

 

• dimensions W/L/H: 297 x 150 x 217cm
• steel profiles: ⌀ 25mm
• full 360º access to plants
• zips: 100% light-proof

Full technical specifications: here*

 

Assembly instructions: here*

 

Features:

 

• dimensions W/L/H: 297 x 150 x 217cm
• steel profiles: ⌀ 25mm
• full 360º access to plants
• flanges: 2 pcs. DF25
• duct connectors: 2 pcs. ⌀ 250mm
• plant support net (included)
• sturdy and waterproof base that can be removed
• zips: 100% light-proof
• weight: 42.9kg
• max. load per profile: 25kg
• max. load for the entire tent: 125kg

GrowStream 84 B

 

Aeroponic system with eighty-four growing sites. Known for its high yields, GrowStream is now available on the Bulgarian market. GrowStream aerates the nutrient solution excellently, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resilient and optimises their productivity. Each system includes instructions and a free TA Flora Gro+Bloom+Micro x 1L kit

• Dimensions: 290/195/32 cm (5 m²)
• Effective capacity: 220l (2x110l)

Countless gardeners, scientists and researchers are convinced that no other system delivers such good results. NASA scientists have been using these systems for 15 years to investigate the possibilities of hydroponic methods. GrowStream systems are modular and expandable and adapt easily to various applications: GS14 fits easily on a balcony or even behind a window; GS60, with its large reservoir, is suitable for a greenhouse; GS20 and GS28 are low enough to fit in a tunnel greenhouse or home greenhouse; GS56 B and GS84 B are even lower (32 cm), suitable for more professional requirements. TA also carries out custom projects according to customer needs.

 

Garden Highpro MAXLIGHT Air Cooled Reflector is an air-cooled reflector – the perfect solution for problems with controlling the heat generated by indoor growing lighting. The tempered glass, which acts as an insulator, allows you to position the lamp closer to your plants, so that they receive even more light. If you want to replace the bulb or simply clean it, the glass fastening mechanism allows easy removal without having to disconnect the air ducts.

 

• reflective surface material: premium "pearl" aluminium
• housing material: composite plastic
• dimensions LxWxH: 605 x 480 x 215 mm.
• inlet/outlet diameter: Ø150 mm.
• weight: 4.8 kg.
• lamp holder: E40 (included)
• suitable for: 250W, 400W, 600W bulbs

CELLMAX Organic Grow is an easy-to-use liquid organic fertiliser for growing plants. This product will provide the right components to make your plants strong and healthy, so that they produce abundant flowers or fruit. The ingredients in this product are completely natural: the nitrogen is produced from vinasse and the potassium elements in this fertiliser are extracted from seaweed.

 

• High-quality end product and 100% effective
• Total NPK: 3-0-4

CELLMAX Organic Grow professional plant fertiliser for organic cultivation

 

CELLMAX Organic Grow was developed by CELLMAX Nutrients and delivers exceptional results in organic cultivation. The advantage of this substance is that it can be absorbed directly by your plants. Organic Grow enables your crop to grow better and produce more fruit. This product improves plant health and growth. Organic Grow contains no harmful components such as plant growth regulators and no toxic ballast substances.

 

Dosage:

 

• Dilute at a ratio of 1:250 (40ml in 10L of water). Organic Grow can be sprayed or used for watering and is suitable for use in automated irrigation systems.

 

Directions for use:

 

• Shake well before use. Recommended pH: 5.5-6.4. For cultivation in soil, take the opportunity to learn about CELLMAX Organic Pro soil.

 

Storage:

 

• Store in a cool, dark place; protect from freezing! Contains chelates! Keep away from children!

 

Contents:

 

• Contains trace elements and ferments. NK 3-4 + iron

 

Ingredients in % (W/W):

 

• 3.2% total N
• 1.4% N extracted from vinasse
• 1.8% NO
• 4.6% K₂O
• 0.01% Fe Chelate DTPA

LUMii Black LED Bar 30W UV/FR is a specialised LED lamp designed to supplement the main lighting in your indoor garden with important ultraviolet (UV) and far-red (FR) spectra. LUMii Black Bar 30w UV/FR LED is a simple bar-shaped LED lamp that provides supplementary ultraviolet and infrared light to extend the light spectrum provided by other light sources. It is designed to connect to the LUMii Black Blade 400w LED fixture, but can also be used alongside any other full-spectrum grow light to increase crop yield and quality, stimulate growth and support flowering. It plugs in and operates with its own power cable; we recommend controlling it with a timer and using it for about 2 hours a day during the photoperiod. USPs: Adds UVA rays (385 nm) to the grow-light spectrum Adds infrared wavelengths (730 nm) to the grow-light spectrum Fits directly onto the LUMii Black Blade 400w LED Can be used as supplementary lighting with any other grow lighting Powered directly from the mains Technical specifications: Power 30 W ± 5 % Input voltage 100-277 V AC / 50-60 kHz Input current 0,3 A at 100 V, 0,11 A at 277 V Output 56,60 umol/s - wavelength 200-800 nm Chips 385 nm and 730 nm Light beam angle 120° Protection rating IP65 Dimensions Length 605 mm (23,82") Width 57 mm (2,24") Depth 31 mm (1,21") Weight 0,85 kg / 1,87 lb Operating ambient temperature and humidity 0°C - 40°C (32°F - 104°F). Maximum relative humidity 95% Storage temperature and humidity -40°C - 70°C (-40°F - 158°F). Maximum relative humidity 85%

Cosmorrow Kit 200w PPE 2.7 Full Spectrum provides optimal and efficient lighting for all stages of indoor plant growth, combining a full light spectrum with high energy efficiency.

Growing plants indoors requires the right tool, and Cosmorrow Kit 200w PPE 2.7 Full Spectrum is exactly that. This lamp is designed specifically for gardeners seeking high-quality lighting that meets the needs of different plant stages. With its full light spectrum, it ensures that your plants receive all the wavelengths needed for optimal growth and flowering. Its 200W power and PPE 2.7 ensure maximum efficiency with minimal electricity consumption. The kit includes everything needed for quick and easy installation. Whether you are a beginner or an experienced gardener, Cosmorrow Kit will help you grow healthy plants with abundant harvests.

Secret Jardin Cosmorrow LED 40W L90cm IR is a single LED strip emitting in the infrared spectrum. Ideal for supplementary vertical lighting for plants in your tent. The power supply is not included - sold separately! You can purchase it here!

 

• accelerates flowering
• warms the plants
• longer internodes
  
• power: 40W
• voltage: 24V
• efficacy: 1.7µmol/s
• light ratio: 33% IR : 66% 2100°K
• dimming option: yes
• water resistance: IP65
• sturdy and drop-resistant
• warranty: 1 year

 

We recommend using it with a separate timer from the main lighting!

Technical specifications:

 

• accelerates flowering
• warms the plants
• longer internodes
• power: 40W
• voltage: 24V
• efficacy: 1.7µmol/s
• light ratio: 33% IR : 66% 2100°K
• dimming option: yes
• water resistance: IP65
• sturdy and drop-resistant
• dimensions L/W/H: 87 x 3.2 x 1.5cm
• weight: 0.30kg

Secret Jardin DR300 is a tent from the premium Dark Room series, designed for growing indoor plants up to 180cm tall. The tent comes with two DF25 flanges for ducting to an intake and an exhaust fan, plus all accessories needed to install a complete ventilation system.

 

• dimensions W/D/H: 297 x 297 x 217cm
• steel poles: ⌀ 25mm
• full 360º access to plants
• zips: 100% light-proof

 

Full technical specifications: here*

 

Assembly instructions: here*

 

Features:

 

• dimensions W/D/H: 297 x 297 x 217cm
• steel profiles: ⌀ 25mm
• full 360º access to plants
• flanges: 4 pcs. DF25
• duct connectors: 4 pcs. ⌀ 250mm
• plant support net (included)
• sturdy and waterproof base that can be removed
• zips: 100% light-proof
• weight: 66.6kg
• max. load per profile: 25kg
• max. load for the entire tent: 250kg

protects plants from lamp heat

Mounts beneath the lamp and allows it to be positioned as close as possible to plant tops without burn risk. Light is reflected toward the reflector for more even illumination. For 1000W lamps.


eliminates "hot spots"
white coating for diffuse light distribution
protects plants from burns
saves energy and increases efficiency

Electrostart 1000W is a lighting kit designed to operate with HPS (sodium) and MH (metal-halide) lamps.

 

• the kit includes: magnetic ballast, igniter and capacitor
• for HPS and MH lamps
• power: 1000W
• power consumption: 10.3A
• voltage: 230V, 50Hz
• dimensions L/W/H: 25 x 17 x 9 cm.
• weight: 12.0 kg.

Bevoghtiger HE 402 Flens Rond 200mm Cap 10LTR is an excellent choice for anyone seeking a high-performance yet compact and convenient ventilation and air-conditioning system. With a 200 mm flange diameter, this device can be easily integrated into any airflow system, giving you the flexibility to use it in the way that best meets your needs. This device stands out with a 10-litre capacity, meaning it can manage large volumes of air efficiently and reliably. Thanks to its high performance, it can improve air quality in large spaces or maintain stable temperature and humidity in your home, office or production facility.

Faran Analogue Hygrostat is a reliable analogue controller for automatic humidity management in grow rooms, greenhouses, nurseries and other climate-controlled spaces. The device monitors relative air humidity and automatically switches a humidifier on or off to maintain the set level, without complex settings or an internet connection.

Faran Analogue Hygrostat is a practical solution for automatically maintaining optimum humidity in plant-growing spaces. Instead of constantly monitoring and switching on the humidifier manually, the device controls relative humidity and manages the connected humidifier according to the preset value.

Thanks to the analogue control, setup is quick and intuitive. No apps, Wi-Fi connection or digital programming are needed – simply set the desired humidity level with the rotary potentiometer and the hygrostat automatically takes care of the rest.

The device is designed to work with humidifiers such as Faran HR15, Faran HR50 and other standard humidifiers controlled by switching the power supply on and off. When the set humidity is reached, the hygrostat cuts power to the humidifier; when it drops below the set value, it switches it on again.

For best results, the manufacturer recommends installation at plant canopy height and away from the humidifier's direct airflow, to avoid inaccurate readings.

 

Technical specifications

✔️ Manufacturer: Faran

✔️ Type: Analogue hygrostat

✔️ Function: Automatic humidity control

✔️ Operating range: 10% – 80% RH

✔️ Control method: ON/OFF

✔️ Accuracy: ±5% RH

✔️ Hysteresis: approximately 3% RH

✔️ Sensor: Nylon Loop

✔️ Power supply: 220 V AC / 50 Hz

✔️ Maximum switching current: 2.2 A

✔️ Power-cable length: 2 m

✔️ Dimensions: 140 × 95 × 45 mm

✔️ Operating temperature: 10°C – 40°C.

 

📦 The kit includes

✔️ 1 × Faran Analogue Hygrostat

✔️ Power cable

✔️ User manual.

 

📋 Instructions for use

1. Mount the hygrostat on a wall at plant level.
2. Avoid mounting directly next to the humidifier or in the direct path of the water mist.
3. Connect the humidifier to the hygrostat.
4. Set the desired relative humidity using the rotary control.
5. Leave the system running for several hours and check the humidity with a thermo-hygrometer.
6. If necessary, fine-tune the setting until the desired level is reached.

⚠️ Important: For the most accurate readings, place the hygrostat away from the humidifier’s direct airflow, heaters and ventilation openings. This gives a true humidity reading in the plant zone and more precise climate control.

 

 

 

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.