Repair patch for a drainage chamber, 175 × 55 mm

Repair piece for a 175×55 mm sump tray

The Repair Piece for Sump is a solution for repairing damaged sump tray channels. Made to 175 × 55 mm, it allows damaged sections to be easily replaced without having to replace the entire tray. 

Detailed specifications

• Dimensions: 175 × 55 mm — suitable for restoring damaged areas in sump trays.
• Installation: Clean and dry the surface of the damaged area. Apply the branded Staal & Plast adhesive, position the Repair Piece and, if needed, seal the edges to ensure a strong, watertight bond.
• Additional work: After fixing it in place, you may need to drill new holes for valves if the original holes fall within the new section.

Usage recommendations

• Prepare the surfaces thoroughly — they must be clean and dry before gluing.
• Use the original Staal & Plast adhesive to ensure a durable, secure bond.
• After installation, seal the edges if necessary to prevent dirt and moisture from getting in.
• If you need to install valves (sump valves), you can drill new holes in the repaired section.

Benefits

This repair piece for sump trays provides an economical and reliable repair for damaged sections, without the need to replace the entire tray. Its 175×55 mm size allows for precise replacement. The adhesive bond and sealing ensure watertightness and long-term functionality, with the option to install new valves.

Installation and drainage

Compare the external dimensions with the installation space and check whether a drainage hole is already present. For Ebb & Flow, compatible inlet and drain connections, a reservoir, and cycle control are required.

Browse irrigation trays.