Transparent hose 18mm outer and 16mm inner diameter, cut to 1m

Flexible silicone-plastic hose Ø 18 mm,  transparent, suitable for air and water systems — easy installation and flow monitoring.

Detailed features

• Internal diameter (ID): ~ 18 mm
• Material: PVC with silicone softening or a similar polymer — flexible, durable and transparent.
• Construction: reinforced / with thread or braided reinforcement  — for greater strength and resistance to kinking.
• Length: from 1m to 100m.
• Outer diameter and thickness: for similar products, the values are around 1,16″ outer diameter, wall thickness (≈ 3,97 mm).
• Maximum working pressure: 145 psi (~ 10 bar) at standard temperature (~ 21 °C).
• Burst pressure: up to ~ 450 psi (~ 30 bar)
• Minimum bending radius: around 8″ (~ 203 mm) so that the hose does not deform easily.
• Temperature range: from  –20 °C to +66 °C.
• Shore hardness: around 73A (wall hardness).
• Resistance: UV-resistant (for outdoor use), chemically resistant to many liquids and oils.

Recommendations for use

• During installation, leave some slack (or an S-shaped curve) to allow movement and prevent strain during temperature changes.
• Do not allow sharp twisting or bending at an acute angle — observe the bending radius (~ 8″) for long-lasting operation.
• The incoming / air flow must not exceed the hose's recommended flow rate, otherwise the maximum pressure may be exceeded.
• At excessively high pressure, the risk of bursting increases — regularly inspect fittings and hoses for cracking.
• If the hose is used for air, do not allow dust and fibres to accumulate inside — inlet filtration is recommended.
• Periodically check the hose's clarity and integrity — if clouding, cracking or thinning occurs, replace the section.

Benefits

This flexible silicone hose Ø 18 mm offers an ideal solution for distributing air or water — well balanced between flexibility and strength, with parameters suitable for professional and hobby systems. Its transparent design provides visibility and visual flow control.