Rain My Farm Balcony irrigation kit – for up to 30 pots with AMICO+ controller included

Rain My Farm Balcony is a ready-made kit for automatic drip irrigation of up to 30 pots, including an AMICO+ timer, all necessary tubing, fittings and drippers for quick installation of an irrigation system. It is a practical solution for balconies, terraces, yards, greenhouses and conservatories, providing even, economical watering even when you are away from home.

Drip irrigation is one of the most effective ways to maintain optimum plant moisture while significantly reducing water consumption. The My Farm Balcony kit is designed as a ready-made "Do It Yourself" solution, allowing easy installation of an automatic irrigation system without the need for specialised tools or technical knowledge.

The kit allows irrigation of up to 30 pots through individual drippers that deliver water directly to the root system. In this way, plants receive the required amount of water without losses from evaporation or runoff. This leads to healthier growth, lower risk of overwatering and significantly lower water consumption.

The kit includes an AMICO+ timer, which enables fully automatic watering control. The large LCD display with automatic backlight makes settings easier, and programming takes only a few simple steps—setting the start time, duration and watering frequency. This provides reliable, precise irrigation even during holidays or longer absences.

Technical specifications

✔️ Manufacturer: Rain S.p.A.

✔️ Series: My Farm Balcony

✔️ Type: Automatic drip irrigation kit

✔️ Maximum capacity: up to 30 pots

✔️ Included timer: AMICO+

✔️ Installation: To a standard water tap

✔️ Irrigation type: Drip

✔️ Suitable for outdoor and indoor use

✔️ Easy installation without specialised tools

✔️ Can be expanded with additional Rain components.

📦 The kit includes

✔️ 1 × Timer AMICO+

✔️ Main polyethylene tube

✔️ Capillary hose

✔️ Drippers for up to 30 plants

✔️ Connecting fittings

✔️ End caps

✔️ Fixing clips

✔️ Adapters for connecting to a water source

✔️ Detailed installation instructions.

Benefits

✔️ Automatically waters up to 30 pots

✔️ Significantly reduces water consumption

✔️ Maintains constant substrate moisture

✔️ Protects plants from drying out while you are away

✔️ Easy "Do it yourself"

✔️ Timer with digital display included

✔️ Individual water supply to each plant

✔️ Suitable for balconies, terraces, greenhouses and gardens

✔️ Compatible with Rain components for future expansion.

📋 Instructions for use

1. Connect the AMICO+ timer to the water tap.
2. Lay out the main pipe according to the arrangement of the pots.
3. Connect the capillary tubes and drippers to each pot.
4. Use the timer to set the desired watering time, duration and frequency.
5. Start the system and check that all drippers are working correctly.
6. If necessary, adjust the position of the drippers for optimal watering.

⚠️ Important: Before first use, flush the system with clean water to remove any contamination from the tubing. We recommend using a filter at the water source, especially with harder or contaminated water, to prevent drippers from clogging.

💡 Urban Botaniks tip: If you use pots of different sizes, position the drippers so water reaches as close as possible to the base of each plant. This will provide even moisture to the root system and increase watering efficiency.