Hydroponic and Irrigation Systems

GrowMax POWER Grow 500 L/day is a reverse-osmosis system optimised for gardening and hydroponic applications. Up to 500 L/day — no waiting, processing up to 20 litres per hour!

• Reduces your EC. Helps stabilise pH.
• Eliminates 95% of salts and heavy metals.
• Eliminates 99% of chlorine and 90% of sediment down to 5 microns, instantly!
• Get 100% efficiency from your nutrients and fertilisers
• Faster-growing and healthier plants, flowers and vegetables.
• Strengthens plant roots.
• Great for organic production!
• Protects beneficial microorganisms in your soil.
• Ratio of waste water to purified water: 2:1

Instructions for use here!

Reverse Osmosis Membrane Information here!

Reverse Osmosis Membrane Troubleshooting here!

GrowMax POWER Grow 500 L/day can reduce contaminants by 99%. This system is designed for hydroponic or gardening applications. It is built to provide the maximum water flow from the membrane.

Recommended conditions for the water used:

• Water temperature: 25°C
• Water pressure: 60 psi / 4.3 kg/cm³
• TDS (Total Dissolved Solids): 500 ppm / 0,7 EC

Therefore, production will increase or decrease according to changes in the conditions listed above.

Removes or reduces: salts, heavy metals, chloramines, nitrates, nitrites, chlorine, sediment, dirt, rust, oxidation, herbicides and pesticides, volatile organic contaminants (chemical pollutants, benzenes, toluene, oils, trihalomethanes, detergents, polychlorinated biphenyls)

When to replace the filters:

• sediment filter - approximately every 8000 litres of treated water or if clogged
• carbon filter – approximately every 12000 litres of treated water or depending on use
• membrane – membrane lifespan is between 6 months and 2 years, depending on water quality and replacement of the carbon filter, because chlorine is completely unsuitable for the membrane

*If the carbon filter is clogged, this will also have an effect and shorten the membrane's lifespan.

Warranty:

• The product has a 1-year warranty.
• When you register your product here, you will automatically receive one more year of warranty for your product, for a total of 2 YEARS PRODUCT WARRANTY.

Suitable for a 6mm hole and 4mm tubing

GrowMax 3000 Carbon Block Filter is a replacement carbon filter for the GrowMax 3000 system.

CuttingBoard

27-site cutting (clone) system. An exceptionally good system for developing vigorous, healthy and adaptable plants with a strong root system. CuttingBoard can be used by professionals and beginners alike, as well as by researchers, teachers and botany professors. Suitable for rooting fruit trees, walnut and almond trees, ornamental shrubs, fruit, vegetables and flowers. Each system includes instructions and a free GHE pH Down Dry kit

Dimensions: 66x30x14cm 

Capacity: 13 L 

Number of sites: 27 

WARNING! Do not leave already rooted cuttings in the system for a long time, ---because their roots can become entangled and difficult to remove and separate.

GrowStream 84 B

Aeroponic system with eighty-four growing sites. Known for its high yields, GrowStream is now available on the Bulgarian market. GrowStream aerates the nutrient solution excellently, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resilient and optimises their productivity. Each system includes instructions and a free TA Flora Gro+Bloom+Micro x 1L kit

• Dimensions: 290/195/32 cm (5 m²)
• Effective capacity: 220l (2x110l)

Countless gardeners, scientists and researchers are convinced that no other system delivers such good results. NASA scientists have been using these systems for 15 years to investigate the possibilities of hydroponic methods. GrowStream systems are modular and expandable and adapt easily to various applications: GS14 fits easily on a balcony or even behind a window; GS60, with its large reservoir, is suitable for a greenhouse; GS20 and GS28 are low enough to fit in a tunnel greenhouse or home greenhouse; GS56 B and GS84 B are even lower (32 cm), suitable for more professional requirements. TA also carries out custom projects according to customer needs.

The hydroponic vertical tower with 9 levels is a practical system for growing plants without soil. It enables efficient use of space by providing optimal conditions for the development of various vegetables, herbs and leafy crops. It is suitable for home use, as well as for greenhouses or small urban gardens.

Construction: vertical system with 9 separate levels, allowing multiple plants to be grown in a small area.

Hydroponic principle: plants grow without soil, receiving nutrients through a circulating nutrient solution.

Material: made from durable, lightweight materials (plastic), suitable for long-term use in contact with water and nutrient solutions.

Space saving: the vertical design enables maximum use of limited space, making it suitable for balconies, terraces, greenhouses and indoor spaces.

Suitable crops: ideal for lettuce, herbs, spinach, rocket, strawberries and other compact plants.

Modular design: the levels are arranged to ensure good water circulation and even distribution of the nutrient solution.

The set includes: 1x sponge for germinating your seeds; 1x seed tray; 1x timer; 1x plug adapter with dimmer; 1x water pump matched to the system flow rate; 1x top cap; 1x top part that distributes the water solution; 9x tier sections, with 4 openings for baskets; 1x cover for the body section; 1x container for the water solution; 4x short bolts with nuts; 2x long bolts; 36x hydroponic baskets.

The BOYU LK-60 air pump is specially designed for quiet operation, just like every SES air pump. The only difference is that the LK model has a higher flow rate and higher air pressure. It features an aluminium motor housing, good heat dissipation and a long service life.

• current: 230V, 50/60Hz
• power: 40W
• pressure: > 0.03Mpa
• flow rate: 60l/min / 3600l/h
• outlet diameter: ⌀ 19mm
• dimensions: 288 x 196 x 193mm

25mm Hose (FLEXI PIPE) per 1m. is a high-quality flexible hose designed for a wide range of applications in gardening, hydroponic systems, irrigation and other industrial needs. Made from durable materials, this hose offers excellent flexibility and long-lasting performance.

Key features:

• Diameter: 25 mm

• Minimum cut length: 1 meter

• Material: Flexible PVC with UV protection

• Colour: Black

• Working pressure: Up to 6 bar

• Temperature range: -10°C to +60°C​

Advantages:

• UV resistance: Protects against ageing and cracking when exposed to sunlight.

• Flexibility: Easy to install and handle, even at low temperatures.

• Versatility: Suitable for use in various irrigation and hydroponic systems.

• Durability: Withstands mechanical stress and weather conditions.​

Applications:

• Drip irrigation systems

• Hydroponic installations

• Gardening and greenhouses

• Industrial applications requiring flexible connections

AQUAbox Spyder is designed to supply water and feed plants of all types and sizes that are grown directly in the soil.
AQUAbox Spyder is attached to capillary wicks that distribute water beneath the soil over an area of up to 1.2 square metres.
With an AQUAvalve valve at its base, AQUAbox Spyder draws water from a reservoir only in the amount plants need, ensuring efficient water use. Plant roots instinctively grow towards the water source, attaching themselves to the capillary wicks below soil level.

• 4 mm tubing - 2.15 metres
• Aqua Valve valve
• Water reservoir seal
• 6 mm capillary strip, 6 metres long
• Small spirit level
• 13 mm to 4 mm reducer with filter

Video: https://www.youtube.com/watch?v=3IRMITTlc1k

HydroDrip 120 is an intelligent automatic drip irrigation system with a built-in pump and timer, designed for potted plants, balconies, terraces, offices and greenhouses. The system operates without a connection to the water supply – simply place the suction hose in a container of water. Thanks to programmable watering cycles and the ability to operate for up to 120 minutes, it provides reliable irrigation even when you are away from home.

HydroDrip 120 is a practical solution for automatically watering potted plants without the need for a water supply installation. The built-in electric pump draws water directly from a bucket, barrel or other reservoir and supplies it to the drippers, which deliver the required amount of water directly to the plant roots. This reduces water loss and maintains constant substrate moisture.

The timer allows easy adjustment of both the interval between waterings and the duration of each cycle. You can select a watering frequency from 1 hour to 7 days, and the duration can be set from 1 to 120 minutes, allowing the system to be adapted to different plant types and pot volumes.

The system is powered by 3 AA batteries, allowing fully autonomous operation without mains power. The kit is easy to install and includes all the main components for building an automatic drip system. It is suitable for watering during holidays, business trips or everyday use.

Technical specifications

✔️ Model: HydroDrip 120

✔️ Type: Automatic drip irrigation system

✔️ Power supply: 3 × AA (1.5 V) alkaline or NiMH rechargeable batteries

✔️ Built-in water pump

✔️ Maximum flow rate: 250 ml/min

✔️ Maximum suction height: 5 m

✔️ Maximum delivery height: 2 m

✔️ Operating current: ≤ 500 mA

✔️ Standby consumption: ≤ 100 μA

Watering settings

✔️ Frequency:

• 1 hour
• 3 hours
• 6 hours
• 12 hours
• 24 hours
• 48 hours
• 7 days

✔️ Duration:

• 1 minute
• 3 minutes
• 5 minutes
• 10 minutes
• 15 minutes
• 20 minutes
• 30 minutes
• 60 minutes
• 90 minutes
• 120 minutes

📦 The kit includes

✔️ 1 × Timer with built-in pump

✔️ 1 × Inlet filter

✔️ 10 × Drippers

✔️ 10 × Dripper stakes

✔️ 10 × Tee connectors

✔️ 1 × End cap

✔️ 1 × Pressure regulator

✔️ 10 m hose

✔️ 1 × Metal mounting bracket.

📋 Instructions for use

1. Place the inlet hose in a container of clean water.
2. Connect the drippers to the hose and position them at each plant.
3. Insert 3 AA batteries into the timer.
4. Set the desired watering frequency and duration.
5. Secure the device using the included metal bracket.
6. Check that the system operates correctly before first use.

⚠️ Important: To prevent clogging of the drippers, use clean water and periodically clean the inlet filter. Position the suction hose so that it remains submerged in water throughout the operating period.

💡 Tip from Urban Botaniks: HydroDrip 120 is ideal for people who travel often. Thanks to its ability to water for up to 120 minutes and autonomous battery operation, the system can maintain optimal plant moisture for days or weeks without human intervention.

Atami WILMA XXL20 Tray (AW420TR) is an original replacement bearing and drainage tray for the Wilma XXL 20 hydroponic system. It supports the 20 pots above the nutrient tank and, through its shaped slope, returns the excess nutrient solution by gravity back into the tank. The size is 115 × 115 × 20 cm, corresponding to the square format of the Wilma XXL series. 

tray AW420TR is intended as a direct replacement component for the Atami Wilma XXL 20 system. The pots are placed in it, and the nutrient solution that drains after irrigation is collected and directed back to the tank, which allows it to be reused in the recirculation system. 

The configuration with 20 plant positions is suitable for denser placement of smaller pots on an area of ​​115 x 115 cm. The tray itself is a spare part - reservoir, pots, pump and irrigation system are not included. The official Wilma XXL 20 system uses a tank of 150 L and 20 pots of 6.5 L. 

Technical specifications

• Manufacturer: Atami / Wilma
• Model: Tray for Wilma XXL20
• Product code: AW420TR
• Type: Spare support / drainage tray
• Dimensions: 115 × 115 × 20 cm
• Capacity: 20 positions for flower pots
• Compatible system: Wilma XXL 20 Complete
• Official pot size in the system: 20 × 6.5 L
• Function: Maintaining the pots and draining the excess nutrient solution
• Drain: Gravity to feed tank
• Suitable for: Hydroponic and substrate cultivation with Wilma XXL 20 system.

🔄 How

With the Wilma system, the pots are placed on the tray and the nutrient solution is supplied to each plant by drip irrigation. Excess water and nutrient solution pass through the pots and fall onto the tray, from where they return to the tank. Atami designed the Wilma as an automated drip system suitable for a variety of substrates – including coconut, peat mixes and hydroponic substrates. 

🔗 Compatibility

Tray is designed specifically for:

Atami / Wilma XXL 20 Complete 6.5L

The parts catalog specifically identifies AW420TR as the "Wilma XXL 20 pot tray" for this configuration. 

📦 What does the product

1 × Atami Wilma XXL20 Replacement Tray – AW420TR

⚠️ This is not a Wilma XXL20 kit. Pots, tank, pump, hoses, drippers and other irrigation system components are purchased separately if not already part of the existing system. 

T.A CultiMate Solar

Efficient, reliable, easy to use and economical. T.A CultiMate Solar systems are based on the first “home” hydroponic system, designed in 1975. Plants are rooted in a layer of clay pebbles above a nutrient-solution reservoir; the solution is pumped upward through an “air column” while being aerated. This oxygen-enriched solution constantly bathes the roots, supporting exceptional growth.

The set includes:

ACO-2201 air pump - 220V, 1,8W; pressure >0,012Mpa, 1,3L/min - with a 1-year warranty

Large reservoir for easy stabilization of the working solution; ample room for roots

The system comes with clear, detailed instructions for assembly and use

With minimal maintenance, it delivers fast, stable growth, superior flowering and an excellent harvest

Dimensions: 46x46x43cm

Total volume approx. 45L, effective volume 35L

Made from durable, UV-protected plastic

For 1–6 plants, depending on their type, size and needs

The 20 μ filter protects the following activated-carbon filter in the system. The FCPS-AB antibacterial mechanical filter is made of polypropylene foam that uses BACINIX^TM antimicrobial and antibacterial nanosilver technology. The FCPS20-AB filter retains particles as small as 20 microns.

FCPS20-AB mechanical filter cartridges, made of polypropylene fibres, are formed as foam whose density increases from the outside in. This fibre structure contains microbubbles with openings, increasing the contact between the filtered water and the filter. If the filtering surface of the FCPS20-AB filter element were unfolded, it would be the size of a football field.

Features of the FCPS20-AB antibacterial mechanical filter:
Increased purification capacity thanks to the internal foam structure;
BACINIX^TM nanosilver technology with antimicrobial and antibacterial protection;
Long service life and a high degree of filtration;
BACINIX^TM nanosilver technology destroys more than 700 strains of bacteria while preventing mould and mildew;
FCPS-AB filter cartridges remove rust, sand, silt and all other dirt from water.
Do not use to purify water with unknown microflora or before water disinfection!

Maintaining a constant nutrient-solution temperature in hydroponic systems (NFT and DWC) within optimum limits is extremely important for preserving oxygen levels and protecting roots from Pythium* and other diseases.

With the Hailea HC-250A Chiller 600 - 2200 l/h, controlling water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-use digital controller
• function for automatic shutdown against overheating
• for a tank / aquarium volume of: 250 l

The chiller is designed to operate with a water pump delivering 600 to 2200l/h (sold separately).

Instructional video: here.*

Features:

• model: HC-250A
• recommended flow rate: 600 - 2200 l/h
• for a tank / aquarium volume of: 250 l
• fittings: 2x ⌀ 25 mm (included)
• power: 1/6 HP
• power consumption: 300 W
• voltage: 220-240V, 50Hz
• current: 1.3A
• dimensions: 448 x 330 x 440 mm
• weight: 18 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Simply fill the chiller with clear vinegar, leave it for 24 hours and then rinse with water. Make sure you also place an air-circulation fan near the chiller to avoid heat build-up.

Please note:

1. The flow rate is determined according to the pump's maximum flow (submersible pump or another external power filter) and the circulation equipment.
2. The cooling-performance test is shown when the ambient temperature is 30°C, the water temperature before cooling is 28°C, the set temperature is 16°C and the cooled water is no more than 250 litres. As the water is cooled, its temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives to avoid affecting appliance performance.
4. When there is insufficient air exchange in a room, cooling efficiency is reduced if the ambient temperature rises due to heat from the unit.

GrowStream 60

Aeroponic system with sixty growing sites. Known for its high yields, GrowStream is now available on the Bulgarian market. GrowStream aerates the nutrient solution exceptionally well, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resilient and optimises their productivity. Each system includes instructions and a free T.A Flora Gro+Bloom+Micro x 1L kit

• Dimensions: 325/100/56 cm (3 m²)
• Effective capacity: 240 l

GrowStream 60

Aeroponic system with sixty growing sites. Known for its high yields, GrowStream is now available on the Bulgarian market. GrowStream aerates the nutrient solution exceptionally well, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resilient and optimises their productivity. Each system includes instructions and a free T.AFlora Gro+Bloom+Micro x 1L kit

• Dimensions: 325/100/56 cm (3 m²)
• Effective capacity: 240 l

Countless gardeners, scientists and researchers are confident that no other system delivers such good results. NASA scientists have used these systems for 15 years to explore the possibilities of hydroponic methods. AeroFlo systems are modular and expandable and readily adapt to different applications: GS14 fits easily on a balcony or even behind a window; GS60, with its large reservoir, is suitable for a greenhouse; GS20 and GS28 are low enough to fit in a polytunnel or home greenhouse; GS56 B and GS84 B are even lower (32 cm), suitable for more professional needs. T.A also delivers custom projects according to customer requirements.

Compression fitting end cap 20 for PE pipes.

Maximum working pressure 12,5 bar.

Maintaining a constant nutrient-solution temperature in hydroponic systems (NFT and DWC) within optimum limits is extremely important for preserving oxygen levels and protecting roots from Pythium* and other diseases.

With the Hailea HC-2200BH Chiller 1500 - 4000L/h, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-use digital controller
• function for automatic shutdown against overheating
• for a reservoir / aquarium with a volume of: 2000 L 
• The chiller is designed to operate with a water pump with a flow rate of 1500 to 4000L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-2200BH
• recommended flow rate: 1500 - 4000 L/h
• for a reservoir / aquarium with a volume of: 2000 L
• fittings: 4x ⌀ 25 mm (included)
• power: 2 HP
• power consumption: 1610 W
• voltage: 220-240V, 50Hz
• amperage: 7A
• dimensions: 634 x 468 x 590 mm
• weight: 47 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Simply fill the chiller with clear vinegar, leave it for 24 hours and then rinse with water. Make sure you also place an air-circulation fan near the chiller to avoid heat build-up.

Please note:

1. The flow rate is determined according to the pump's maximum flow (submersible pump or another external power filter) and the circulation equipment.
2. The cooling-performance test is shown when the ambient temperature is 30°C, the water temperature before cooling is 28°C, the set temperature is 16°C and the cooled water volume is no more than 2000 litres. When water cooling is reduced, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives to avoid affecting appliance performance.
4. When there is insufficient air exchange in a room, cooling efficiency is reduced if the ambient temperature rises due to heat from the unit.

HS Valve is a single-channel valve that uses the same channel for both filling and tray drainage. It is supplied as standard with a 3.5 mm internal opening, but the diameter can be modified on request. The valve offers 6 – 31 l/min filling, depending on the diameter and pressure, and 1.7 – 6 l/min drainage. Suitable for installation below filters, it is resistant to contamination and aggressive environments.

Detailed features

• Operating function: single-channel – one line serves both filling and drainage.
• Opening diameter: standard 3.5 mm, other sizes on request.
• Filling flow rate: from 2.3 to 31 l/min, depending on the opening diameter and water pressure.
• Drainage flow rate: from 1.7 to 6.0 l/min, depending on the opening diameter.
• Hose-connection options:
  • ¾″ hose
  • ½″ hose
  • PE hose 8×10.5 mm and 10×12.5 mm
  • PE hose 6×8 mm ([turn0view0])
• Manual bottom valve: allows filling to a specific tray to be stopped.
• Installation option: installed below the filters to prevent clogging from leaves and contaminants.
• Construction and maintenance: durable design, resistant to demanding growing conditions, with a removable internal cone for easy cleaning.

Recommendations for use

• Choose a suitable orifice diameter (3,5 mm or another size on request), matched to the water pressure for the desired filling and drainage flow rate.
• Install the valve beneath the tray filter to ensure protection from contaminants and trouble-free operation.
• Use the manual bottom valve when you want to stop filling a particular tray.
• Cleaning is easy — simply disassemble the removable cone and remove the accumulated particles.

Benefits

• Unified filling and drainage line — fewer components and easier installation.
• Wide flow range — from 2,3 to 31 l/min for filling and from 1,7 to 6,0 l/min for drainage, depending on the conditions.
• Flexible connection options for various hoses (½", ¾", PE).
• Easy installation below filters and excellent resistance to contamination.
• Robust construction and easy servicing ensure a long service life.

Compression tee fitting 25x25x25 for PE pipes.

Maximum working pressure 10 bar.

Make watering your garden as easy as child's play with the Water Master irrigation controller! Programming the timer takes just 2 easy steps - turn the Run Time dial to set the desired watering duration and the Frequency dial to set the desired interval between waterings. Then connect it to the garden hose with a standard quick connector and the timer will do the rest!

• uses an efficient solenoid valve
• up to 8 watering cycles per day
• programming the frequency and watering duration
• easy and quick to install on any tap

Technical specifications:

• Frequency (Frecuancia / Frequency): you can set irrigation every 1, 2, 3, 4, 6, 8, 12, 24, 48, 72 hours or 1 week
• Run time / watering (Tiempo activo / Runtime): 1, 3, 5, 10, 15, 20, 30, 60, 90, or 120 minutes
• Connections: ¾ male and ¾ female connector
• Batteries: 2 x AAA (not included)

PLANT!T AEROS is an easy-to-use Deep Water Culture (DWC) hydroponic system, also known as a "bubbler". With a minimal amount of substrate and intensive aeration, this pot provides fast plant growth and strength. Key technical features:

• System type: DWC (Deep Water Culture)
• Reservoir capacity: 15L (effective capacity: 12L)
• Dimensions: 303 mm width, 357 mm depth, 353 mm height
• Air and water pump included

Fast growth, healthy roots and easy use with PLANT!T AEROS!

PLANT!T AEROS is an exceptionally popular and easy-to-use hydroponic kit for growing plants with the Deep Water Culture (DWC) method, also known as a "bubbler". The system uses a minimal amount of growing medium (for example, hydroton) while providing more nutrients through aeration of the solution.

How does the system work?

The plant is placed in a hydroponic pot filled with substrate (most commonly expanded clay pebbles - hydroton), and its roots are immersed in nutrient solution. Thanks to the air pump and air stones at the bottom of the reservoir, the solution is constantly aerated. This keeps the plant's roots in constant contact with nutrients and oxygen, which leads to significantly accelerated growth. Aeration also keeps the roots healthy and gives them continuous, gentle movement.

Nutrient-solution control:

For optimal results, we recommend regular monitoring of the solution's pH and EC values. This is easily done by simply removing the lid and testing the solution.

High component quality:

All PLANT!T AEROS components are made of high-quality materials and are fully compatible to provide long-lasting, reliable operation.

The set includes:

• Main reservoir with a transparent section for monitoring water level
• Main reservoir lid
• Inspection opening cap
• Nutrient-solution distribution set
• Two-outlet air pump
• Silicone air hose (1 m)
• Hydroponic net pot
• Water pump and other additional components for maximum convenience

Compact and efficient submersible pump Hailea HX-4500 with a flow rate of up to 2 000 l/h and a head of up to 2,8 m — suitable for ponds, fountains, feeding and circulation systems. Includes a mixer for aerating the solution; designed for long-term use; works well with a low water level in the reservoir; features a built-in flow regulator; suitable for NFT and Flood-and-Drain systems; includes suction cups for secure attachment in the reservoir.

Detailed features

• Flow rate (maximum): 2 000 L/h.
• Maximum head: 2,8 m.
• Power: 36 W.
• Power supply: 220-240 V / 50 Hz.
• Outlet diameter: 20 mm.
• Construction: housing made of ABS plastic, stainless-steel shaft, resistant to fertiliser solutions

Features:

• Rotary flow-control dial
• Built-in mixing port / air-intake accessory on some versions
• Suction cups for securing to surfaces
• Ability to operate at low water level

Recommendations for use

• Secure the pump to a smooth surface with the rubber suction feet to avoid vibration and movement.
• Use a Ø 20 mm hose to avoid a reduction in flow rate.
• Adjust the flow rate according to your needs, especially at different water-column heights.
• Clean the intake cover / filter regularly to prevent clogging and loss of performance.
• Never allow the pump to run dry — it must always be at least partly submerged or supplied with water contact.
• When used in nutrient-solution systems (hydroponics), check the material's compatibility with fertiliser solutions.

Benefits

Hailea HX-4500 is a reliable compact pump offering a flow rate of up to 2 000 L/h, adjustable flow and robust construction. It provides good head for small to medium systems and is suitable for fountains, ponds and hydroponic installations.

Rain My Farm Balcony is a ready-made kit for automatic drip irrigation of up to 30 pots, including an AMICO+ timer, all necessary tubing, fittings and drippers for quick installation of an irrigation system. It is a practical solution for balconies, terraces, yards, greenhouses and conservatories, providing even, economical watering even when you are away from home.

Drip irrigation is one of the most effective ways to maintain optimum plant moisture while significantly reducing water consumption. The My Farm Balcony kit is designed as a ready-made "Do It Yourself" solution, allowing easy installation of an automatic irrigation system without the need for specialised tools or technical knowledge.

The kit allows irrigation of up to 30 pots through individual drippers that deliver water directly to the root system. In this way, plants receive the required amount of water without losses from evaporation or runoff. This leads to healthier growth, lower risk of overwatering and significantly lower water consumption.

The kit includes an AMICO+ timer, which enables fully automatic watering control. The large LCD display with automatic backlight makes settings easier, and programming takes only a few simple steps—setting the start time, duration and watering frequency. This provides reliable, precise irrigation even during holidays or longer absences.

Technical specifications

✔️ Manufacturer: Rain S.p.A.

✔️ Series: My Farm Balcony

✔️ Type: Automatic drip irrigation kit

✔️ Maximum capacity: up to 30 pots

✔️ Included timer: AMICO+

✔️ Installation: To a standard water tap

✔️ Irrigation type: Drip

✔️ Suitable for outdoor and indoor use

✔️ Easy installation without specialised tools

✔️ Can be expanded with additional Rain components.

📦 The kit includes

✔️ 1 × Timer AMICO+

✔️ Main polyethylene tube

✔️ Capillary hose

✔️ Drippers for up to 30 plants

✔️ Connecting fittings

✔️ End caps

✔️ Fixing clips

✔️ Adapters for connecting to a water source

✔️ Detailed installation instructions.

Benefits

✔️ Automatically waters up to 30 pots

✔️ Significantly reduces water consumption

✔️ Maintains constant substrate moisture

✔️ Protects plants from drying out while you are away

✔️ Easy "Do it yourself"

✔️ Timer with digital display included

✔️ Individual water supply to each plant

✔️ Suitable for balconies, terraces, greenhouses and gardens

✔️ Compatible with Rain components for future expansion.

📋 Instructions for use

1. Connect the AMICO+ timer to the water tap.
2. Lay out the main pipe according to the arrangement of the pots.
3. Connect the capillary tubes and drippers to each pot.
4. Use the timer to set the desired watering time, duration and frequency.
5. Start the system and check that all drippers are working correctly.
6. If necessary, adjust the position of the drippers for optimal watering.

⚠️ Important: Before first use, flush the system with clean water to remove any contamination from the tubing. We recommend using a filter at the water source, especially with harder or contaminated water, to prevent drippers from clogging.

💡 Urban Botaniks tip: If you use pots of different sizes, position the drippers so water reaches as close as possible to the base of each plant. This will provide even moisture to the root system and increase watering efficiency.

Hydroponic baskets (mesh pots). Suitable for hydroponic and aeroponic systems. Small sizes are suitable for rooting systems.