Vents Boost 200 1140m3/h - turbine fan (inline)

VENTS Boost 200, fan 1140 m³/h

Vents Boost 200 is an innovative inline fan that can be used in ventilation systems requiring a powerful airflow: commercial, office and other public or industrial premises, as well as rooms with high humidity. The fan is equipped with a three-speed* brush motor, which ensures smooth airflow distribution and provides the best combination of powerful airflow, increased pressure and low noise.

• housing: plastic
• max. airflow: 1140m³/h
• diameter: ⌀ 200mm
• 1^st speed: 82W, 0.37A, 752m³/h
• 2^nd speed: 101W, 0.45A, 978m³/h
• 3^rd speed: 113W, 0.51A, 1140m³/h

Note: The fan has no speed switch; your desired speed is set manually when connecting the power cable.

VENTS Boost series turbine fans:

• Application. Designed for supply or exhaust ventilation systems requiring powerful airflow: commercial, office, and other public or industrial premises, as well as rooms with high humidity.
• Design. The housing is made of polymer. Thanks to the conical polymer impeller with specially profiled blades, the circumferential velocity of the airflow increases, resulting in higher airflow and pressure compared with the performance of standard axial fans. The specially designed diffuser, impeller, and airflow straightener at the fan outlet ensure smooth airflow distribution and enable the best combination of high airflow, increased pressure, and low noise. The fan housing is equipped with a sealed terminal box for connection to the mains.
• Motor. VENTS Boost fans are equipped with single-phase, high-efficiency, three-speed asynchronous motors with low power consumption. The motor is equipped with thermal switches for overheat protection. Ball bearings ensure a long service life (approximately 40,000 hours of continuous operation). The motor's ingress protection rating is IPX4.
• Speed control. The fan has no speed switch; the desired speed is set manually when the power cable is first connected.
• Installation. The fans can be installed anywhere and at any angle in the duct system. Several fans can be installed in one system in parallel to achieve higher airflow or in series to increase the operating pressure in the system. The fan housing is equipped with mounting brackets for the floor, wall, or ceiling. 

Full technical specifications: here*

Technical specifications:

• motor: AC (brushed)
• housing: plastic
• max. current: 230V, 50Hz
• max. airflow: 1140m³/h
• diameter: ⌀ 200mm
• 1^st speed: 82W, 0.37A, 1866 rpm, 752m³/h, 39dB
• 2^nd speed: 101W, 0.45A, 2400 rpm, 978m³/h, 46dB
• 3^rd speed: 113W, 0.51A, 2738 rpm, 1140m³/h, 50dB
• conveyed air temperature (max):  55°C
• conveyed air temperature (min): -25°C