Vents Boost 200 1140m3/h - turbine fan (inline)

Vents Boost 200 is an innovative inline fan that can be used in ventilation systems requiring powerful airflow: commercial, office and other public or industrial premises, as well as rooms with high humidity. The fan is equipped with a three-speed* brush motor that provides smooth airflow distribution and enables the best combination of powerful airflow, increased pressure and low noise.

• housing: plastic
• maximum airflow: 1140m³/h
• diameter: ⌀ 200 mm
• 1^st speed: 82W, 0.37A, 752m³/h
• 2^nd speed: 101W, 0.45A, 978m³/h
• 3^rd speed: 113W, 0.51A, 1140m³/h

Note: the fan has no speed switch; the desired speed is set manually when connecting the power cable.

VENTS Boost series turbine fans:

• Application. Intended for supply or extract ventilation systems requiring powerful airflow: commercial, office and other public or industrial premises, as well as rooms with high humidity.
• Design. The housing is made of polymer. The conical polymer impeller with specially profiled blades increases the air-flow velocity, resulting in higher airflow and pressure than standard axial fans. The specially designed diffuser, impeller and outlet air-flow straightener ensure smooth air distribution and provide the best combination of high airflow, increased pressure and low noise. The fan housing is fitted with a sealed terminal box for connection to the mains.
• Motor. VENTS Boost fans are equipped with single-phase, high-efficiency, three-speed asynchronous motors with low energy consumption. The motor is fitted with thermal switches for overheating protection. Ball bearings provide a long service life (approximately 40 000 hours of continuous operation). The motor ingress-protection rating is IPX4.
• Speed control. The fan has no speed switch; the desired speed is set manually when first connecting the power cable.
• Installation. The fans can be installed anywhere and at any angle in the duct system. Several fans can be installed in one system in parallel for higher airflow or in series to increase the operating pressure in the system. The fan housing is fitted with mounting brackets for the floor, wall or ceiling.

Full technical specifications: here*

Technical specifications:

• motor: AC (brushed)
• housing: plastic
• max. current: 230V, 50Hz
• max. airflow: 1140m³/h
• diameter: ⌀ 200 mm
• 1^st speed: 82W, 0.37A, 1866 rpm, 752m³/h, 39dB
• 2^nd speed: 101W, 0.45A, 2400 rpm, 978m³/h, 46dB
• 3^rd speed: 113W, 0.51A, 2738 rpm, 1140m³/h, 50dB
• transported-air temperature (max.): 55°C
• transported-air temperature (min.): -25°C