AutoPot 1Pot Accessory Pack

AutoPot 1Pot Accessory Pack is an original set of spare and expansion components for AutoPot 1Pot systems with a 6 mm pipe system. The set includes the latest-generation AQUAvalve5, together with all essential parts needed to replace worn components or add another watering point to an existing AutoPot system.

AutoPot 1Pot Accessory Pack is a practical solution for maintaining and expanding AutoPot systems. Whether you wish to replace worn components or add another pot to an existing installation, this set contains all the essential elements needed to connect and operate a new module correctly.

At the heart of the set is the AQUAvalve5 – AutoPot's latest-generation automatic valve. It regulates the supply of water and nutrient solution to plants without electricity, pumps or timers. Thanks to its gravity-fed operating principle, the valve delivers water only when plants need it, allowing the growing medium to go through natural wetting and drying cycles.

The set also includes the Root Control Disc, which prevents roots from reaching the valve, and the Matrix Disc, which provides even water distribution at the base of the pot. The included tubing, connectors and grommet allow quick connection to the existing 9 mm AutoPot system.

All components are original AutoPot spare parts, made for full compatibility with 1Pot systems using 6 mm tubing.

Technical specifications

✔️ Manufacturer: AutoPot

✔️ Type: AutoPot 1Pot accessory pack

✔️ Compatibility: AutoPot 1Pot (9 mm)

✔️ Valve: AQUAvalve5

✔️ Pipe size: 9 mm

✔️ Original AutoPot replacement components

✔️ Suitable for system expansion or repair.

📦 The kit includes

✔️ 1 × AQUAvalve5

✔️ 1 × Matrix Disc

✔️ 1 × Root Control Disc

✔️ 1 × 6 mm pipe (1 m)

✔️ 1 × 6 mm T-connector

✔️ 1 × 16–6 mm cross connector

✔️ 1 × 6 mm Top Hat seal (rubber grommet)

✔️ Installation instructions.

Benefits

✔️ Original AutoPot components

✔️ Includes the new-generation AQUAvalve5

✔️ Easy installation without specialised tools

✔️ Suitable for system repair and expansion

✔️ Ensures reliable operation of the gravity-fed irrigation system

✔️ Compatible with all AutoPot 1Pot systems with 9 mm pipework

✔️ High-quality, long-lasting components.

Application

Suitable for:

• AutoPot 1Pot systems

• Replacement of worn components

• Expansion of existing AutoPot installations

• Automatic gravity-fed irrigation

• Home and professional plant growing.

📋 Instructions for use

1. Turn off the water supply to the AutoPot system.
2. Install the AQUAvalve5 in the relevant tray according to the instructions.
3. Place the Root Control Disc and Matrix Disc at the bottom of the pot.
4. Connect the supplied 6 mm pipe to the existing irrigation line using the included connectors.
5. Check all connections for a proper seal.
6. Fill the reservoir and test system operation before placing the plants.

⚠️ Important: The kit is intended for AutoPot 1Pot systems with 6 mm pipework. Before purchasing, check which type of pipe system you use to ensure full compatibility.

💡 Urban Botaniks tip: When replacing the AQUAvalve, it is advisable to replace the Root Control Disc at the same time, especially if the system has operated for several seasons. This will ensure trouble-free operation and prevent roots from reaching the valve.