Cornwall Humidity Controller - humidity controller (hygrostat)

The CORNWALL humidity controller is the ideal device for ensuring optimum humidity for your crop. Connect it to your humidifier or dehumidifier and set the desired humidity. The controller does the rest.

• Voltage: 230V AC/50HZ
• Maximum load: 16A 3680W
• Inductive load: 2A 460W
• Operating temperature: 5°C - 40°C
• Storage temperature: -10°C - 50°C
• Controlled humidity range: 20% - 90%
• Accuracy: ±5%
• Sampling interval: 10 sec

Please read the instructions before use:

• Before setting the humidity, select the operating mode: dehumidification (fan icon) or humidification (droplet icon). In “dehumidification” mode, the controller supplies power when humidity exceeds the set value; in “humidification” mode, when humidity falls below the set value.
• To change the operating mode, press ON/OFF and the “up arrow” together for 3 seconds.
• Default setting: Humidity (SET): 40%; Mode: Humidification
• Setting the humidity: press ON/OFF

Humidification mode (droplet icon):

• use the arrows to set the SET value at least 5% above the RH humidity (the currently measured humidity). After a few minutes, the indicator will turn green and the controller will begin supplying power;
• when the room humidity (RH) reaches the SET level, the indicator turns red, the droplets disappear from the display and the controller stops supplying power.
• when the room humidity (RH) is above the SET level, the indicator is red and the controller will not supply power.

Dehumidification mode (fan icon):

• use the arrows to set the SET value at least 5% below the RH humidity (the currently measured humidity). After a few minutes, the indicator will turn green and the controller will begin supplying power;
• when the room humidity (RH) falls to the SET level, the indicator turns red, the fan disappears from the display and the controller stops supplying power.
• when the room humidity (RH) is below the SET level, the indicator is red and the controller will not supply power.

Important:

• Do not connect a power strip after the controller!
• Do not connect devices that transmit vibrations to the controller!
• Ensure the safety of heating and moving appliances!
• Keep away from moisture, extreme temperatures, impacts and vibrations!
• Use indoors only; do not expose to sunlight!
• Keep away from children!

Recharge the battery when the device shows “LO” by plugging the device into a socket!