Cornwall Temperature Controller - Thermostat

Cornwall Temperature Controller, ideal for stabilizing the temperature of your crop. It is suitable for use with both an air conditioner and other heating appliances (heaters), depending on the selected function.

• Voltage: 230V AC/50HZ
• Maximum load: 16A 3680W
• Inductive load (exhaust fan): 2A 460W
• Operating temperature: 0°C - 40°C
• Storage temperature: -10°C - 50°C
• Controlled temperature: 5°C - 30°C / 40°F - 85°F
• Accuracy: ±1°C / ±3°F
• Reading interval: 10 sec

Please read the instructions before use:

• Before setting the temperature, select the operating mode – cooling (snowflake icon) or heating (flame icon). In “cooling” mode, the device supplies power when the temperature exceeds the set value; in “heating” mode, when the temperature falls below the set value. To change the operating mode, press ON/OFF and “up arrow” together for 3 seconds.
• To switch between °C and °F, press “up arrow” and “down arrow” together for 3 seconds
• Default setting – cooling; 20°C
• Setting the temperature – press ON/OFF

Mode Cooling:

• Use the arrows to set the “SET” temperature at least 2° below the “RM” temperature (the currently measured temperature). After a few minutes, the indicator will turn green and the controller will begin supplying power;
• When the “RM” temperature reaches the “SET” temperature, the indicator will turn red and the snowflake will disappear from the display; the controller will stop supplying power.
• When the “SET” temperature is above the “RM” temperature, it will be red and the controller will not supply power.

Mode Heating:

• Use the arrows to set the “SET” temperature at least 2° above the “RM” temperature (the currently measured temperature). After a few minutes, the indicator will turn green and the controller will begin supplying power;
• When the “RM” temperature reaches the “SET” temperature, the indicator will turn red and the flame will disappear from the display; the controller will stop supplying power.
• When the “SET” temperature is below the “RM” temperature, it will be red and the controller will not supply power.

Important:

• Do not connect a power strip after the controller!
• Do not connect devices that transmit vibrations to the controller!
• Ensure the safety of heating and moving appliances!
• Protect from moisture, extreme temperatures, impacts and vibrations!
• Use indoors only; do not expose to sunlight!
• Keep away from children!

Recharge the battery when the device shows “LO” by plugging the device into a socket!