Hailea HC-130A, water chiller, circulation 200 to 1000 L/h

Maintaining a constant nutrient solution temperature within optimal limits in hydroponic systems (NFT and DWC) is extremely important for preserving oxygen levels and maintaining suitable conditions in the root zone.

With the Hailea HC-130A 200 - 1000 L/h chiller, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with freshwater and saltwater
• refrigerant R134a
• low noise levels
• easy-to-use digital controller
• feature with automatic overheating shutoff
• for tanks/aquariums with a volume of: 130 L

The chiller is designed to operate with a water pump with a flow rate of 1000 L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-130A
• recommended flow rate: 200 - 1000 L/h
• for a tank / aquarium with a volume of: 130 L
• fittings: ⌀ 12 or ⌀ 17 mm (included)
• power: 1/15 HP 
• power consumption: 130 W
• current: 220-240V, 50Hz
• amperage: 0.8A
• dimensions: 338 x 218 x 325 mm
• weight: 9.5 kg
• warranty: 1 year

Recommendations: The cooler should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Clean according to the unit's instructions. Make sure to install an air circulation fan near the chiller to prevent heat buildup.

Please note:

1. The flow rate is determined by the pump's maximum flow (submersible pump or other external power filter) and the circulation equipment.
2. The cooling performance test is shown for an ambient temperature of 30°C, a water temperature before cooling of 28°C, a set temperature of 16°C, and no more than 130 liters of cooled water. As the water cooling capacity decreases, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter, and other connecting components. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use other alternatives, to avoid affecting the unit's performance.
4. When a room does not have sufficient air exchange, cooling efficiency decreases if the ambient temperature rises due to heat from the unit.

Cooling capacity sizing

The specified flow rate in L/h is for circulation through the unit. Cooling also depends on the volume, ambient temperature, and heat load. Ensure adequate ventilation and use a compatible water pump.

Browse water chillers.