T.A. FlashClean - cleaning agent

TA FlashClean is

• prevents clogging of irrigation-system drip emitters
• protects plants from stress and root damage
• corrects the nutrient balance
• addresses so-called nutrient "lockout"
• nourishes microbial life and refreshes soil and coco
• boosts growth in the final stage (especially with FinalPart)

How to use FlashClean:

Unlike other flushing products on the market, FlashClean is not an acid, contains no enzymes and does not discharge magnesium or other mineral additives into your system, making it uniquely versatile: you can treat your plants with it at any time during growth or flowering, but no more than once every two weeks!

In recirculating hydroponic systems:

• To refresh before changing nutrients (including before FinalPart): add 1.5 to 3ml/l. FlashClean to the existing nutrient solution and let the system circulate for 24 hours before draining and replacing it with fresh nutrient solution. Use the lower dose for young or delicate plants and the higher dose for established plants or those close to harvest.
• After overfeeding or nutrient "lockout": drain the old nutrient solution, add 1.5 to 3ml/l. FlashClean to pH-adjusted water (you do not need to fill the entire reservoir, only enough for the system to circulate and operate freely). Let it circulate for 24 hours before draining and adding fresh new nutrient solution. Use the lower dose for young or delicate plants and the higher dose for established plants or those close to harvest.
• For a final flush (after FinalPart): drain the old nutrient solution, add 1.5 to 3ml/l. FlashClean to pH-adjusted water (you do not need to fill the entire reservoir, only enough for the system to circulate and operate freely). Let it circulate for the final two days before harvest, to raise plant sugar levels instead of losing aroma and active-compound content through a longer water flush.

In soil, coco or another substrate (clay pebbles, perlite):

• For a refresh before changing nutrients (including before FinalPart and after overfeeding or nutrient "lockout"): every 15 days (or when needed after lockout, etc.): fill a watering can with fresh, pH-adjusted water and add 1.5 to 3 ml/l. FlashClean. Water until it drains into the saucer / through the bottom of the pot. Resume the regular feeding schedule with the next watering. Use the lower dose for young or fragile plants and the higher dose for developed plants / plants close to harvest.
• For a final "flush" (after FinalPart): add 3 ml/1 l of water FlashClean instead of base nutrients during the final two days before harvest to increase sugar levels in plants, rather than losing aroma and active-compound content through a longer water-only "flush".

Note: with FloraKleen you can treat your plants at any stage of growth or flowering, but no more than once every two weeks!

Use with: all fertilisers and substrates, but especially with FinalPart:

• FlashClean helps FinalPart reach its full potential. By flushing nitrogen and other mineral salts from the substrate, FinalPart will work more effectively, mobilising nitrates and improving the final aroma / flavour of the harvest.
• Before harvest, instead of 10 days of water-only "flush", try 2 with FlashClean—growers around the world do it because, in commercial production, 8 extra days of harvest are a major benefit!