TechGrow T-Micro CO2 Controller - CO2 Controller

The TechGrow T-Micro CO2 Controller is the smallest controller from TechGrow. A very easy-to-use CO₂ controller. The best in its class thanks to its fully electronic technology.

• Power supply: from 100 to 240V (automatic)
• Power frequency: 50 to 60Hz
• Consumption: 3W (with sensor, without a source of CO₂)
• CO₂ concentration setting range: 300 to 2000ppm
• CO₂ +/- setting range: 20 to 200ppm (we recommend 50ppm)
• Measurement time: 1 measurement per second
• Cable: 5 m UTP network cable  included

Note: sensor sold separately!

Instructions for use: here*

The TechGrow CO₂ T-Micro Controller is an electronically controlled device that measures and regulates the CO₂ level in the room. It automatically switches day/night settings via the external CO₂ sensor and light sensor. The TechGrow CO₂ T-Micro Controller has a sturdy housing and is equipped with an LCD display. In addition, the T-Micro's built-in calibration function allows calibration of the CO₂ sensor against outdoor air.

Recommended sensor: TechGrow S-2 0/2000 ppm

Compatible sensors:

1. TechGrow S-ECO 0/2000 ppm
2. TechGrow S-2 0/2000 ppm
3. TechGrow S-4 0/2000 ppm

Features:

• Plug & Play can be used in small or very large rooms
• highly accurate external CO₂ sensor, manufactured by SenseAir® Sweden, a leading manufacturer in CO₂ measurement
• built-in function for calibrating the CO₂ sensor against outdoor air
• can be set from 300 to 2000 ppm
• the sensor takes a measurement every second
• switches the CO₂ source (CO₂ generator, CO₂ cylinder) on/off via a 230V relay
• memory backup for the set point and hysteresis in the event of power interruptions
• automatic 110V-230V detection
• the LED indicates when CO₂ is being dosed
• the external CO₂ sensor has a built-in light sensor to automatically switch between day/night settings
• automatically detects a broken cable or poor connection of connected sensors
• the sensor is connected using a standard (UTP) network cable
• controller and sensor are sold separately